Sanyo VCC-MC500P, VCC-MC600P 53

Specifications

Image sensor	: 1/4"
Effective pixels	: 752 (H) x 582 (V)
Horizontal resolution	: Over 520 TV lines
Lens	: x30 zoom lens, f=3.5 - 105 mm (F1.4 - 3.7)
	Electronic zoom and gearing
	Zoom speed setting possible
Electronic zoom	: 16 power (combined with optic zoom gives 480 power max)
	Max zoom magnification setting possible
	Vertical resolution ON/OFF setting
Auto focus	: AUT/ONE-PUSH/MANUAL
	AF area setting possible (3 step)
Iris control	: AUTO/MANUAL
Synchronization method	: Internal synchronization/Line lock
	V phase adjustment possible
Lowest image illumination	: 0.8 lx (F1.4, AGC gain at maximum, COLOR mode)
	0.04 lx (F1.4, B/W mode)
	0.025 lx (F1.4, x32 electronic sensitivity increased, COLOR mode)
	0.00125 lx (F1.4, x32 SENSE UP, B/W mode)
S/N	: Over 50 dB
Backlight compensation	: Center-weighted average metering/multi-spot evaluative metering
Day/Night	: AUTO / COLOR / B/W settings available
Electronic shutter	: • Fast shutter speed (SHORT) mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
	1/4000, 1/10000
	• Slow shutter speed (LONG) mode: x1, x2, x4, x8, x16, x32
Electronic sensitivity boosting	: AUTO/OFF, works with auto iris
	Up to x32 max setting possible
White balance	: ATW/AWC/MWB/3200/5600/FLUO (Fluorescent lighting)
AGC gain	: Low/Normal/Middle/High/Off (When “OFF” is selected, manual gain adjustment is
	available.)
Motion sensor	: ON/OFF, individual settings possible
Aperture	: H/V setting possible
Privacy masking	: ON/OFF, max of 24 masked locations (Wide view screen; 1 screen max 4 masks)
	The mask can be set regardless of the camera’s direction.
Alarm input/output	: External input: 8, External output: 2, NO (Normal open)/NC (Normal closed) switch
	Motion sensor with external alarm AND/OR output options
Camera titles	: ON/OFF, 16 characters
Camera view	: 8 settings
Auto mode	: Sequential pan/auto pan/tour (4 patterns each)
Rotation range	: Horizontal: 360° endless. Vertical: -5° - 185°
Rotation speed	: Horizontal- Preset: 435°/second. Manual: 0.1° - 120°/second
	Vertical- Preset: 400°/second. Manual: 0.1° - 120°/second
Preset positions	: 128 positions
Communications	: Coaxial control, RS-485
Operational temperature/humidity	: -10 – 50°C/below 90% RH
Power source	: DC 24 V

External appearance and specifications subject to change without notice.

52

Contents

About this manual Main Features Precautions Before Using the Menu Basic Operations for Performing Settings Camera Settings (CAMERA) Expendable items Accessories Page Page ●To select the menu to perform settings ●To display an advanced setting screen for the selected menu ●To select an option for the setting item ●To go back to a previous setting screen ●To exit from the menu screen bSetting menu mode bSetting menu composition AAdjusting synchronization signal (SYNC) BSetting lens aperture (IRIS) CSetting the white balance (WHITE BALANCE) DSetting(BLC) the backlight compensation level ESetting the electronic shutter (SHUTTER) GSetting the AGC level (AGC) ISetting the Day/Night function (DAY/NIGHT) HSetting the gamma correction level (GAMMA) A Adjusting synchronization signal (SYNC) B Setting lens aperture (IRIS) bAuto iris (AUTO) bManual iris (MANU) C Setting the white balance (WHITE BALANCE) bAuto trace white balance (ATW) bOne-pushautomatic white balance (AWC) bFixed white balance (3200/5600/FLUO) bManual white balance (MWB) D Setting the backlight compensation level (BLC) bMulti-spotevaluative metering (MULT) bCenter-weightedaverage metering (CENT) bMulti-spotmetering (MASK) E Setting the electronic shutter (SHUTTER) bFast shutter speed (SHORT) bSlow shutter speed (LONG) Setting the profile compensation F (APERTURE) G Setting the AGC level (AGC) Setting the gamma correction level H (GAMMA) I Setting the Day/Night function (DAY/NIGHT) bSetting the Day/Night function (AUTO) bUsing the color mode only (COLOR) bUsing the black and white mode only A Setting the focusing mode (FOCUS) bAuto focus (AUTO) bManual focus (MANU) B Setting the zooming operations (ZOOM) BMaking the amount of movement in the screen constant (PROPORTIONAL) CDisplaying a still image while switching the surveillance location (FREEZE) DSetting the starting point (0 degrees) angle information (SET NORTH) ELimiting the tilting angle (TILT LIMIT) A Registering a surveillance location (PRESET POSITION) bDetermining the surveillance position (POSITION) bSpecifying the camera ID and title bRegistering a view setting file (CAMERA VIEW) ASetting the motion sensor (MOTION) bGrouping the preset positions (SEQUENCE GROUP) bDeleting a preset position (DELETE) bSwitching to a preset position (PRESET GO) Making the amount of movement in the B screen constant (PROPORTIONAL) CDisplaying a still image while switching the surveillance location (FREEZE) Setting the starting point (0 degrees) D angle information (SET NORTH) E Limiting the tilting angle (TILT LIMIT) AMonitoring multiple preset positions sequentially (SEQUENCE) BPanning between two surveillance locations in loop (AUTO PAN) CRepeating a recorded monitoring process (TOUR) DReturning automatically to the specified surveillance mode (AUTO RETURN) Monitoring multiple preset positions A sequentially (SEQUENCE) Panning between two surveillance B locations in loop (AUTO PAN) Repeating a recorded monitoring C process (TOUR) Returning automatically to the Dspecified surveillance mode (AUTO RETURN) ASetting the alarm input (ALARM IN) DSetting the motion sensor (MOTION) BSetting the alarm output (ALARM OUT) ESetting the alarm information display (ALARM DISPLAY) CSetting the alarm disabling duration (ALARM DISABLE) A Setting the alarm input (ALARM IN) B Setting the alarm output (ALARM OUT) Setting the alarm disabling duration C (ALARM DISABLE) D Setting the motion sensor (MOTION) bSetting the motion zone bSetting the detection sensitivity Setting the alarm information display E (ALARM DISPLAY) Page bEnabling password lock bDisabling password lock bChanging the password Page ASetting the display information (INFORMATION) BSetting the auto flip function (AUTO FLIP) CSetting the mirroring function (MIRROR) DPerforming the refresh function (REFRESH) Setting the display information A (INFORMATION) bSetting the item to be displayed (DISPLAY) bDisplaying the system information (SYSTEM) Setting the auto flip function B (AUTO FLIP) Setting the mirroring function C (MIRROR) Performing the refresh function D (REFRESH) Page Page Page SANYO Electric Co., Ltd