Miscellaneous Settings (OPTION)
Setting the display information
A (INFORMATION)
Sets the type and position of the information displayed on the monitor.
OPTION |
|
|
INFORMATION | SET | y |
AUTO FLIP | ON |
|
MIRROR | OFF | y |
REFRESH | SET | |
PRESET | OFF |
|
MENU | BACK |
|
bSetting the item to be displayed (DISPLAY)
1Use the joystick lever (xy) to select [INFORMATION] – “SET y”, and press the [ENTER] button.
The INFORMATION screen appears.
INFORMATION |
|
|
DISPLAY | OFF |
|
SYSTEM | SET | y |
2Use the joystick lever (xy) to select [DISPLAY], use the lever (vw) to select “ON y”, and press the [ENTER] button.
The DISPLAY screen appears.
DISPLAY |
|
|
CAMERA ID |
|
|
ON |
| |
TITLE | ON |
|
DIRECTION | ON | y |
ZOOM RATIO | ON | y |
3Use the joystick lever (xy) to select the information item, use the lever (vw) to select “ON (displayed)/OFF (not displayed)”, and press the [ENTER] button.
Available settings:
•CAMERA ID
•TITLE
•DIRECTION (Pan/tilt angle)
•ZOOM RATIO (Magnification power in zooming)
Adjusting the display position
For [DIRECTION] and [ZOOM RATIO], you can adjust the display position.
Selecting “ON y” for the item to adjust the display position and pressing the [ENTER] button displays the adjusting screen. Use the joystick lever to adjust the display position for the item.
To return to the DISPLAY screen, press the [ENTER] button again.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
bDisplaying the system information (SYSTEM)
1Use the joystick lever (xy) to select [INFORMATION] – “SET y”, and press the [ENTER] button.
The INFORMATION screen appears.
INFORMATION |
|
|
DISPLAY | ON | y |
SYSTEM | SET | y |
2Use the joystick lever (xy) to select [SYSTEM] – “SET y”, and press the [ENTER] button.
The system information is displayed in the screen.
CAMERA VER
PROTOCOL 485S
ADDRESS 1
BAUD RATE 19200
TERMINATION OFF
MENUBACK
Setting the camera’s address
If the address setting switch on the camera is set to “0”, you can use the menu screen to specify the camera’s address.
1In the system information screen, select [ADDRESS] and press the [ENTER] button.
If the address setting switch on the camera is set to “0”, the address number is highlighted.
ºADDRESS 001
MENUBACK
The initial setting for the address is “001”.
2Use the joystick lever to enter the address number.
Use the lever (vw) to select a digit to enter a number and use the lever (xy) to select number.
3Useagain.the joystick lever (v) to highlight the address
This completes the address setting.
Memo: After turning off and on the camera again, the address setting becomes effective.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
49