Alarm Settings (ALARM)
A Setting the alarm input (ALARM IN)
The ALARM IN screen allows you to perform the alarm settings (input preferences, alarm action, etc.) for each alarm input number.
ALARM |
|
|
|
|
|
ALARM IN | 1 | y |
ALARM OUT | 1 | y |
ALARM DISABLE | OFF |
|
MOTION | OFF |
|
ALARM DISPLAY | OFF |
|
PRESET | OFF |
|
MENU | BACK |
|
1Use the joystick lever (xy) to select [ALARM IN], use the lever (vw) to select an alarm input number (1 - 8), and press the [ENTER] button.
The ALARM IN screen appears.
ALARM IN 1 |
|
POLARITY | NO |
ACTION | PRESET |
RETURN | ON |
MOTION ALARM | OR |
ALARM OUT | OFF |
LINE OUT | OFF |
DURATION | 5S |
2Use the joystick lever (xy) to select [POLARITY] and use the lever (vw) to select the polarity for the alarm input signal.
Available settings:
•NO (Normal Open):
Normally open so closed condition is detected as input.
•NC (Normal Close):
Normally closed so open condition is detected as input.
3Use the joystick lever (xy) to select [ACTION] and use the lever (vw) to select the action after the alarm is detected (alarm action).
Available settings:
•PRESET: When the alarm is detected, the camera moves to the preset position whose preset number is the same as the alarm input number.
Before using the “PRESET” option, set the preset position for the corresponding alarm input number.
•SEQ A - D: Starts the Sequence mode operation (A - D).
•PAN 1 - 4: Starts the Auto Pan mode operation (1 - 4).
•TOUR 1 - 4: Starts the Tour mode operation (1 - 4).
•OFF: Does not perform the alarm action.
4Use the joystick lever (xy) to select [RETURN] and use the lever (vw) to select the operation after the alarm action.
Available settings:
•OFF: Does not return to the operation status before the alarm.
•ON: Returns to the operation status before the alarm.
Memo: • When [RETURN] is set to “ON”, the camera returns to the
•If another alarm input is received during the time specified in the [DURATION] setting, the operation will be performed according to the last alarm.
5Use the joystick lever (xy) to select [MOTION ALARM] and use the lever (vw) to select how the motion sensor is used.
For alarm detection criteria, the motion sensor built into the camera can be used in combination with the alarm input from an external device.
Available settings:
•AND: When both the motion sensor and the external device detect an alarm condition, the alarm is activated.
•OR: When either the motion sensor or the external device detects an alarm condition, the alarm is activated.
Before enabling the settings under [MOTION], be sure to set [MOTION] in the ALARM screen to “PRESET”.
6Use the joystick lever (xy) to select [ALARM OUT] and use the lever (vw) to select an alarm output terminal.
The alarm signal can be output from the alarm output terminal, enabling you to connect external devices such as recorder, alarm buzzer and warning lamp.
Available settings:
•OFF: Does not output the alarm signal.
•1: Uses the output terminal 1.
•2: Uses the output terminal 2.
7Use the joystick lever (xy) to select [LINE OUT] and use the lever (vw) to determine whether the alarm signal is output to the connection line to the system controller.
Available settings:
•OFF: Does not output the alarm signal to the connection line.
•ON: Outputs the alarm signal to the connection line.
39