SATO M-8400RV Value specified for Print Quantity see Page 4-61 should be, Follows, On a label

Section 4. Programming Reference

Printer Output

Special Notes	1.	The value specified for Print Quantity (see Page 4-61) should be
		equal to the number of different sequential values desired
		multiplied by the number of repeats specified.
	Example:
		To print 2 sets each of the numbers 1001-1025 on separate
		labels, we need 50 total labels. The commands would be as
		follows:
		<ESC>A
		<ESC>H0100<ESC>V0100<ESC>F002+001<ESC>XM1001
		<ESC>Q50
		<ESC>Z
	2.	It is necessary to specify the print position for each sequential field
		on a label.
	3.	Up to eight different sequential fields can be specified per label.
	4.	This command ignores alpha characters in the sequential number
		field.
	5.	This command can not be used with the following commands:

Copy Image, Page 4-31

Reverse Image, Page 4-66

Line Feed, Page 4-50

SATO M-8400RV 9001041 Rev. D Page 4-73