SATO M-8400RV manual Calendar, Ignore CR/LF

Section 2. Installation and Configuration

To enable the Calendar feature (if installed) press the LINE key until the underline cursor is beneath the YES. If the Calendar feature is to be disabled, press the LINE key until the underline cursor is beneath the NO. When the desired setting is selected, press the FEED key.

The format of the display is YY/MM/DD hh:mm (Year/Month/Day/hours:minutes). The date format is fixed and cannot be changed.

CALENDAR

00/00/00 00:00

1.Year - The first display shown will have the two digit year selection underlined. You can scroll through the dates by pressing the LINE key. The year number will increase by one each time the LINE key is pressed until it reaches its maximum legal value (i.e., “99” for the year digits) at which point it will wrap around to the “00” setting.

2.Month - After you have set the correct year, pressing the FEED key will advance the underline cursor to the two digit Month position. You can scroll through the numbers corresponding to the month by pressing the LINE key. The month number will increase by one each time the LINE key is pressed until it reaches a value of “12” at which point it will wrap around to the “01” setting.

3.Day - After you have set the correct month, pressing the FEED key will advance the underline cursor to the two digit Day position. You can scroll through the numbers corresponding to the month date by pressing the LINE key. The date number will increase by one each time the LINE key is pressed until it reaches a value of “31” at which point it will wrap around to the “01” setting.

4.Hour - After you have set the correct date, pressing the FEED key will advance the underline cursor to the two digit Hour position. You can scroll through the numbers corresponding to the hour (using a 24 hour clock) by pressing the LINE key. The hour number will increase by one each time the LINE key is pressed until it reaches a value of “24” at which point it will wrap around to the “01” setting.

5.Minute- After you have set the correct hour, pressing the FEED key will advance the underline cursor to the two digit Minute position. You can scroll through the numbers corresponding to the hour by pressing the LINE key. The minute number will increase by one each time the line key is pressed until it reaches a value of “60” at which point it will wrap around to the “01” setting.

6.After you have set the calendar, pressing the FEED key will accept the setting and advance to the CR/LF display.

Ignore CR/LF

This selection tells the printer to strip out all carriage return/line feed pairs (CRLF ) from the data stream, including graphics and 2D bar codes. It is used primrily to maintain compatibility with earlier models of SATO printers.

1. Use the LINE key to step the underline cusor to either the YES or NO selection.

SATO M-8400RV 9001041 Rev. D Page 2-29