SATO M-8400RV Characters, Custom-Designed, Command Structure Store Command ESCTabcc, ESCK1H903F

Section 4. Programming Reference

Characters, Custom-Designed

Command Structure Store Command: <ESC>Tabcc

Recall Command: <ESC>Kab90cc

	a	=	1	16x16 matrix
			2	24x24 matrix
	b	=	Specifies the character encoding method for the data stream
			H	Hexadecimal characters
			B	Binary characters
	cc	=	Memory location to store/recall the character. Valid memory
			locations are 21 to 52 (counting in Hex) or “!” to “R” in Binary
	(data)		=	Data to describe the character
	Example:			<ESC>T1H3F
				<ESC>K1H903F
				See Appendix C for a more detailed explanation
	Placement:			The Store command is typically sent in its own data
				stream to the printer, between the Start/Stop commands.
				The Recall command is sent in a secondary data stream
				to print the character,and follows any necessary position
				or size commands.
	Default:		None
Command Function	To allow for the creation, storage, and printing of custom characters,
	such as special fonts or logos. Up to 50 individual characters may be
	stored in the custom character volatile memory.
Printer Input	See Appendix C for a detailed explanation.
	<ESC>A
	<ESC>T1H3F

0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0

<ESC>Z

<ESC>A <ESC>H150<ESC>V100<ESC>L0505<ESC>K1H903F <ESC>H350<ESC>V100<ESC>L1010<E SC>K1H903F <ESC>Q1<ESC>Z

SATO M-8400RV 9001041 Rev. D Page 4-21