ADF tray, Connect Copy port, Bypass tray | Savin 3370, 3355 specs

1.ADF tray

When copying two-sided originals, the originals are delivered here.

Note

❒Even when copying one-sided origi- nals, you can select the ADF tray.

2.ADF external tray

When copying one-sided originals, the originals are delivered here.

3.Connect Copy port

Attach the optional Connect Copy cable here.

Important

❒Do not connect any other equip- ment to the Connect Copy port.

❒Be sure to turn off the main power switch on both the master unit and sub-unit before you disconnect the Connect Copy cable. Unplugging the cable while power is on could damage the machines.

4.Bypass tray

Use to copy onto OHP transparencies, adhesive labels, translucent paper, post- cards, and non-standard size paper.

5

Image 18

Savin 3370, 3355 operating instructions ADF tray, Connect Copy port, Bypass tray

Contents

3355/3370 Page Means Power on Means Stand by Safety Information Safety During OperationPage How to Read this Manual Symbols Table of Contents Sort/Stack/Staple Job PresetPreset Reduce/Enlarge Punch Copying from the Bypass Tray Series/Book 137 Combination Chart 206Features and Benefits 210 Cover/Slip Sheet 151 Printing Saved Documents 216 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Deleting Saved Documents 220 Changing the Paper Size 282 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Adding Staples 285 Specification 354Page Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components ADF tray Connect Copy portBypass tray To copy onto OHP transparencies and translucent paper Output Tray GuideTo copy onto normal paper and thick paper Ventilation hole Large Capacity Tray LCT OptionsSheet Finisher Booklet Finisher Control Panel IndicatorsMain power indicator Screen Contrast knob Start key Function indicatorsFunction Status indicator Number keys Display Panel Displays and Key OperationsInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machine Turning Off the Main Power Starting the MachineShutting Down the Machine Inch version OriginalsMetric version Non-recommended originals for the document feeder Sizes Detectable by the Auto Paper Select Missing Image Area Sizes difficult to detectExposure glass Document feeder Copy Paper Recommended Paper Sizes and Types B5KL, A5KL Non-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Make sure that there are no previous settings remaining Basic ProcedureMake sure that the machine is in Copy mode Set your originals Auto Reset Press the Start key Setting Originals Setting Originals on the Exposure GlassLift the document feeder Setting Originals in the Document Feeder Lower the document feeder Original Orientation Standard OrientationTurn Select the original orientation Make sure that the Standard Orientation key is selected Press the 90 Turn key Press the OK key Setting Special Originals Batch Sadf mode Mixed Sizes mode X14 11X17 Thin mode Press the Thin key Press the OK key Adjusting Copy Image Density Basic Functions Select one of Image Density modes Make sure that the Auto Image Density key is selected Selecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select Press the appropriate key to select the original type Where Original Is Set Paper Size and Direction Select the copy paper Make sure that the Auto Paper Select key is selected Rotated copy Where Original Is Set Original Size and Direction Auto Reduce/Enlarge Copying onto Tab Stock Select the paper trayTab sheet tray Preparation Set originals Place the tab stocks in tray Make copies Pull out tray 2 until it stops Adjust the back fence as follows Select the paper tray tray Place your originals as follows Stack optional finisher required Sort/Stack/StapleSort Staple optional finisher required Maximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Set the original, then press the Start key StackStack After all originals are scanned, press the #key Sheet Finisher Booklet Finisher Staple 16KKL Except Stapling position and original setting Sheet /100-Sheet Finisher Metric version Inch version 2 × Stitch Select one of the stapling positions Press the Cancel key To Stop Scanning TemporarilyPress the Resume key to resume scanning When Memory Reaches 0% To Remove the Paper from the Staple Unit