![](/images/new-backgrounds/1265993/26599387x1.webp)
Setting Originals
Setting Originals
Limitation
❒Set originals after correction fluid and ink has completely dried. Not taking this precaution could mark the exposure glass and cause marks to be copied.
| Note | 2 | |
❒ | Basically originals should be aligned to the rear left corner. However, some | ||
|
copy functions may produce different results depending on the direction of the originals. For details, see the explanations of each function.
![](/images/new-backgrounds/1265993/26599387xi2.webp)
Reference
⇒P.19 “Originals”.
Setting Originals on the Exposure Glass
ALift the document feeder.
Important
❒Do not open the document feeder with a force. Otherwise, the cover of the document feeder might open or be damaged.
Note
❒Be sure to open the document feeder by more than 30°. Otherwise the orig- inal size might not be detected correctly.
31