Savin 3355, 3370 operating instructions Where Original Is Set Paper Size and Direction

Copying

Note

❒See the following table for possible copy paper sizes and directions with Auto Paper Select (when copying at a ratio of 100%):

❖ Metric version

Where Original Is Set

Paper Size and Direction

Exposure glass

A3L, B4L, A4KL, B5KL, 81/2" ×

2

13"L *1

Document feeder

A3L, B4L, A4KL, B5KL, A5KL,

B6KL, 11" × 17"L, 81/2" × 11"KL, 81/

2" × 13"L *1 , 8KL, 16KKL

*1 You can select from 81/2" × 13", 81/4" × 13" and 8" × 13" with the User Tools (Sys-

tem Settings). See “<F/F4>Size Setting” in the System Settings manual.

❖ Inch version

Where Original Is Set

Paper Size and Direction

Exposure glass

11" × 17"L, 81/2" × 14"L, 81/2" ×

11"KL

Document feeder

A4

KL

, 11"

×

17"

L

, 11"

×

L

, 8

1

/2"

×

15"

14"L, 81/2" × 11"KL, 8" × 10"L, 10" ×

14"L, 51/2" × 81/2"KL, 81/2" × 13"L *1

*1 You can select from 81/2" × 13", 81/4" × 13" and 8" × 13" with the User Tools (Sys- tem Settings). See “<F/F4>Size Setting” in the System Settings manual.

❒For some originals, the original size might not be detected correctly. See ⇒ P.21 “Sizes difficult to detect”.

❒When you set special paper, such as recycled paper, in the paper tray, you can have the kind of paper shown on the display. See “Special Paper Indication” in the System Settings manual.

❒In Connect Copy mode, select the copy paper in the master unit.

•We recommend that both units have the same paper settings. Only paper trays loaded with the paper of the same size, direction and type installed in both the master unit and sub-unit are available.

•When you press the [Connect] key, only the paper trays that have the same settings in both units are displayed. Other trays are shown grayed out and cannot be selected.

•If the multiple trays are available in Connect Copy mode, each unit selects the paper tray detected in each “Paper Tray Priority” setting. See “Paper Tray Priority” in the System Settings manual.

•If the paper tray in use runs out of paper in the sub-unit, the paper tray that has the paper identical in size and different in direction is selected, and the original image is rotated (if “On (Rotate)” is selected in “Auto Tray Switch- ing”). See “Auto Tray Switching” in the System Settings manual.

44