Stack, Set the original, then press the Start key | Savin 3355

Copying

When setting a stack of originals in the document feeder

ASet a stack of originals in the document feeder, then press the {Start}key. After all the originals are scanned, the copies are delivered to the tray.

Note

❒The last page should be on the bottom.

2 ❒ If an original is misfed during sorted copying, reset your originals in the document feeder according to the instructions on the display. The dis- play will indicate the number of scanned originals.

When setting an original on the exposure glass or in the document feeder using Batch (SADF) mode

Reference

⇒P.36 “Batch (SADF) mode”.

ASet the original, then press the {Start} key.

Note

❒Start with the first page to be copied.

BSet the next original. When it is placed on the exposure glass, press the {Start} key.

Note

❒Set the original in the same direction as the first one.

CAfter all originals are scanned, press the {#}key.

Stack

The optional finisher is required to use this function.

❖Stack

This function groups copies of each page in a multi-page original together. Every other page stack is shifted for ease of separation. The finisher shift tray of the finisher provides this function by sliding from side to side.

• 50-Sheet/100-Sheet Finisher

1 2 3

1

2

58

Image 71

Savin 3355, 3370 Stack, Set the original, then press the Start key, After all originals are scanned, press the #key

Contents

3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this Manual Table of Contents Punch Copying from the Bypass Tray Job PresetPreset Reduce/Enlarge Sort/Stack/Staple Cover/Slip Sheet 151 Combination Chart 206Features and Benefits 210 Series/Book 137 Deleting Saved Documents 220 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Printing Saved Documents 216 Adding Staples 285 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Changing the Paper Size 282 354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Bypass tray ADF trayConnect Copy port Ventilation hole Output Tray GuideTo copy onto normal paper and thick paper To copy onto OHP transparencies and translucent paper Booklet Finisher OptionsSheet Finisher Large Capacity Tray LCT Screen Contrast knob IndicatorsMain power indicator Control Panel Number keys Function indicatorsFunction Status indicator Start key Initial copy display Display PanelDisplays and Key Operations Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Main power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panel Shutting Down the Machine Turning Off the Main PowerStarting the Machine Non-recommended originals for the document feeder OriginalsMetric version Inch version Sizes Detectable by the Auto Paper Select Exposure glass Missing Image AreaSizes difficult to detect Document feeder Recommended Paper Sizes and Types Copy Paper B5KL, A5KL Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previous settings remaining Press the Start key Auto Reset Lift the document feeder Setting OriginalsSetting Originals on the Exposure Glass Lower the document feeder Setting Originals in the Document Feeder Turn Original OrientationStandard Orientation Make sure that the Standard Orientation key is selected Select the original orientation Press the 90 Turn key Press the OK key Batch Sadf mode Setting Special Originals Mixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin mode Basic Functions Adjusting Copy Image Density Make sure that the Auto Image Density key is selected Select one of Image Density modes Selecting Original Type Setting Press the appropriate key to select the original type Selecting Copy PaperAuto Paper Select Manual Paper Select Where Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paper Rotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and Direction Tab sheet tray Copying onto Tab StockSelect the paper tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copies Select the paper tray tray Place your originals as follows Adjust the back fence as follows Staple optional finisher required Sort/Stack/StapleSort Stack optional finisher required Maximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys After all originals are scanned, press the #key StackStack Set the original, then press the Start key Sheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original setting Metric version Inch version 2 × Stitch Select one of the stapling positions Press the Resume key to resume scanning Press the Cancel keyTo Stop Scanning Temporarily To Remove the Paper from the Staple Unit When Memory Reaches 0%