Except | Savin 3355, 3370 manual

Copying

❖Inch version

With 50-Sheet Finisher

With 100-Sheet Finish-

With Booklet Finisher

er

Paper

11"

×

L

1

/2"

×

11"

×

17"

L

, 8

1

/2"

×

11"

×

L

1

/2"

×

size

17"

, 8

17"

, 8

14"L, 81/2" × 11"KL

14"L, 81/2" × 11"KL

11"K(L) *3

Saddle stitch function:

2

11" × 17"L, 81/2" ×

11"L

Sta-

(without punch)

(without punch)

• 81/2" × 11"K or

pler

1

/2" × 11" or small-

1

/2"

× 11"K: 100

smaller: 50 sheets

capac-

• 8

•

8

(20 lb. Bond)

ity

er: 50 sheets (20 lb.

sheets (20 lb. Bond)

Bond)

•

Except 8

1

/2" × 11"K:

• 81/2" × 11"Lor larg-

• 81/2" × 14" or larger:

er: 30 sheets (20 lb.

50 sheets (20 lb.

30 sheets (20 lb.

Bond)

Bond)

• Saddle stitch func-

Bond)

tion: 15 sheets (20 lb.

Bond)

Shift

3,000 sheets (20 lb.

3,000 sheets (20 lb.

750 sheets (20 lb. Bond)

tray

Bond)

Bond)

*2

capac-

ity

(81/2"

×

11"K)

*1

*1

*2

*3

Depending on the number of sheets to be stapled and whether sheets have punched holes or not, the maximum tray capacity might be reduced.

If you copy when the paper remains on the tray, the capacity might be reduced. Available staple positions are “Top” and “Bottom”.

❒In the following cases, the copies will be delivered to the shift tray without stapling.

•When the number of sheets for one set is over the stapler capacity.

•When memory reaches 0% during copying.

❒When you select Staple, Sort mode is automatically selected.

Reference

If you want to add staples, see ⇒ P.285 “d Adding Staples”.

When staple is jammed, see ⇒ P.293 “e Removing Jammed Staples”.

62

Image 75

Savin 3355, 3370 operating instructions Except

Contents

3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this Manual Table of Contents Punch Copying from the Bypass Tray Job PresetPreset Reduce/Enlarge Sort/Stack/Staple Cover/Slip Sheet 151 Combination Chart 206Features and Benefits 210 Series/Book 137 Deleting Saved Documents 220 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Printing Saved Documents 216 Adding Staples 285 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Changing the Paper Size 282 354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components ADF tray Connect Copy portBypass tray Ventilation hole Output Tray GuideTo copy onto normal paper and thick paper To copy onto OHP transparencies and translucent paper Booklet Finisher OptionsSheet Finisher Large Capacity Tray LCT Screen Contrast knob IndicatorsMain power indicator Control Panel Number keys Function indicatorsFunction Status indicator Start key Display Panel Displays and Key OperationsInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Main power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panel Turning Off the Main Power Starting the MachineShutting Down the Machine Non-recommended originals for the document feeder OriginalsMetric version Inch version Sizes Detectable by the Auto Paper Select Missing Image Area Sizes difficult to detectExposure glass Document feeder Recommended Paper Sizes and Types Copy Paper B5KL, A5KL Non-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previous settings remaining Press the Start key Auto Reset Setting Originals Setting Originals on the Exposure GlassLift the document feeder Lower the document feeder Setting Originals in the Document Feeder Original Orientation Standard OrientationTurn Make sure that the Standard Orientation key is selected Select the original orientation Press the 90 Turn key Press the OK key Batch Sadf mode Setting Special Originals Mixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin mode Basic Functions Adjusting Copy Image Density Make sure that the Auto Image Density key is selected Select one of Image Density modes Selecting Original Type Setting Press the appropriate key to select the original type Selecting Copy PaperAuto Paper Select Manual Paper Select Where Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paper Rotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and Direction Copying onto Tab Stock Select the paper trayTab sheet tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copies Select the paper tray tray Place your originals as follows Adjust the back fence as follows Staple optional finisher required Sort/Stack/StapleSort Stack optional finisher required Maximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys After all originals are scanned, press the #key StackStack Set the original, then press the Start key Sheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original setting Metric version Inch version 2 × Stitch Select one of the stapling positions Press the Cancel key To Stop Scanning TemporarilyPress the Resume key to resume scanning To Remove the Paper from the Staple Unit When Memory Reaches 0%