Staple | Savin 3355, 3370 specs

Copying

When setting a stack of originals in the document feeder

ASet a stack of originals in the document feeder, then press the {Start}key. After all the originals are scanned, the copies are delivered to the tray.

Note

❒ The last page should be on the bottom.

2

When setting an original on the exposure glass or in the document feeder using Batch (SADF) mode

Reference

⇒P.36 “Batch (SADF) mode”.

ASet the original, then press the {Start} key.

Note

❒Start with the first page to be copied.

BSet the next original. When it is placed on the exposure glass, press the {Start} key.

Note

❒ Set the original in the same direction as the first one.

Staple

The optional finisher is required to use this function.

Each copy set can be stapled together.

Limitation

❒You cannot use the following paper in this function:

•Tab stocks

•Postcards

•Translucent paper

60

Image 73

Savin 3355, 3370 operating instructions Staple

Contents

3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this Manual Table of Contents Preset Reduce/Enlarge Job PresetSort/Stack/Staple Punch Copying from the Bypass Tray Features and Benefits 210 Combination Chart 206Series/Book 137 Cover/Slip Sheet 151 Connect Copy Display Panel 227 Using Connect Copy 230 What is Connect Copy? 223 How Connect Copy Works 225Printing Saved Documents 216 Deleting Saved Documents 220 Dos And Donts 333 Where to Put Your Machine 334 Accessing the User Tools Copy/Document Server Features 305Changing the Paper Size 282 Adding Staples 285 354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Connect Copy port ADF trayBypass tray To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Ventilation hole Sheet Finisher OptionsLarge Capacity Tray LCT Booklet Finisher Main power indicator IndicatorsControl Panel Screen Contrast knob Function Status indicator Function indicatorsStart key Number keys Displays and Key Operations Display PanelInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machine Starting the Machine Turning Off the Main PowerShutting Down the Machine Metric version OriginalsInch version Non-recommended originals for the document feeder Sizes Detectable by the Auto Paper Select Sizes difficult to detect Missing Image AreaExposure glass Document feeder Recommended Paper Sizes and Types Copy Paper B5KL, A5KL Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previous settings remaining Set your originals Press the Start key Auto Reset Setting Originals on the Exposure Glass Setting OriginalsLift the document feeder Lower the document feeder Setting Originals in the Document Feeder Standard Orientation Original OrientationTurn Make sure that the Standard Orientation key is selected Select the original orientation Press the 90 Turn key Press the OK key Batch Sadf mode Setting Special Originals Mixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin mode Basic Functions Adjusting Copy Image Density Make sure that the Auto Image Density key is selected Select one of Image Density modes Selecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Press the appropriate key to select the original type Where Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paper Rotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and Direction Select the paper tray Copying onto Tab StockTab sheet tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copies Select the paper tray tray Place your originals as follows Adjust the back fence as follows Sort Sort/Stack/StapleStack optional finisher required Staple optional finisher required Maximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Stack StackSet the original, then press the Start key After all originals are scanned, press the #key Sheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original setting Metric version Inch version 2 × Stitch Select one of the stapling positions To Stop Scanning Temporarily Press the Cancel keyPress the Resume key to resume scanning To Remove the Paper from the Staple Unit When Memory Reaches 0%