When Memory Reaches 0% | Savin 3355, 3370 instruction

Copying

When Memory Reaches 0%

Scanning will be stopped if the size of scanned image data exceeds memory ca- pacity.

Note

❒There is enough memory to store approximate 200 to 1,000 originals of A4,

	81/2" × 11" size. The number of originals that can be stored in memory varies
2
	depending on the memory setting and original type.

Reference

Scanning will stop when memory reaches 0% during sorted copying. Howev- er, you can change this setting so that all the scanned pages are copied and delivered to the tray first, then the machine automatically continues scanning the remaining originals. See “Memory Full Auto Scan Restart” in ⇒ P.329 “In- put/Output”.

APress the {Start} key.

The scanned pages are delivered to the tray. Then, the image data in memory is cleared.

BRemove the copies and continue copying by following the instructions on the display.

To Remove the Paper from the Staple Unit

If you cancel the stapling copy job in the middle of the job, the paper might be left in the staple unit. In this case, remove the paper from the staple unit.

APress the {Clear Modes/Energy Saver} key to cancel the copy settings.

BSet the next original, then press the {Start} key.

The paper left in the staple unit is automatically delivered, then the next job starts.

Note

❒When the paper is not delivered and the message is displayed, follow the instructions on the display to remove the paper.

68

Image 81

Savin 3355, 3370 operating instructions When Memory Reaches 0%, To Remove the Paper from the Staple Unit

Contents

3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this Manual Table of Contents Preset Reduce/Enlarge Job PresetSort/Stack/Staple Punch Copying from the Bypass Tray Features and Benefits 210 Combination Chart 206Series/Book 137 Cover/Slip Sheet 151 Connect Copy Display Panel 227 Using Connect Copy 230 What is Connect Copy? 223 How Connect Copy Works 225Printing Saved Documents 216 Deleting Saved Documents 220 Dos And Donts 333 Where to Put Your Machine 334 Accessing the User Tools Copy/Document Server Features 305Changing the Paper Size 282 Adding Staples 285 354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components ADF tray Connect Copy portBypass tray To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Ventilation hole Sheet Finisher OptionsLarge Capacity Tray LCT Booklet Finisher Main power indicator IndicatorsControl Panel Screen Contrast knob Function Status indicator Function indicatorsStart key Number keys Display Panel Displays and Key OperationsInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machine Turning Off the Main Power Starting the MachineShutting Down the Machine Metric version OriginalsInch version Non-recommended originals for the document feeder Sizes Detectable by the Auto Paper Select Missing Image Area Sizes difficult to detectExposure glass Document feeder Recommended Paper Sizes and Types Copy Paper B5KL, A5KL Non-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previous settings remaining Set your originals Press the Start key Auto Reset Setting Originals Setting Originals on the Exposure GlassLift the document feeder Lower the document feeder Setting Originals in the Document Feeder Original Orientation Standard OrientationTurn Make sure that the Standard Orientation key is selected Select the original orientation Press the 90 Turn key Press the OK key Batch Sadf mode Setting Special Originals Mixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin mode Basic Functions Adjusting Copy Image Density Make sure that the Auto Image Density key is selected Select one of Image Density modes Selecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Press the appropriate key to select the original type Where Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paper Rotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and Direction Copying onto Tab Stock Select the paper trayTab sheet tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copies Select the paper tray tray Place your originals as follows Adjust the back fence as follows Sort Sort/Stack/StapleStack optional finisher required Staple optional finisher required Maximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Stack StackSet the original, then press the Start key After all originals are scanned, press the #key Sheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original setting Metric version Inch version 2 × Stitch Select one of the stapling positions Press the Cancel key To Stop Scanning TemporarilyPress the Resume key to resume scanning To Remove the Paper from the Staple Unit When Memory Reaches 0%