Sort/Stack/Staple
CSet your originals, then press the {Start} key.
When setting a stack of originals in the document feeder
ASet a stack of originals in the document feeder, then press the {Start}key. After all the originals are scanned, the copies are delivered to the tray.
Note | 2 |
❒The last page should be on the bottom.
When setting an original on the exposure glass or in the document feeder using Batch (SADF) mode
Reference
⇒P.36 “Batch (SADF) mode”.
ASet the original, then press the {Start} key.
Note
❒Start with the first page to be copied.
BSet the next original. When it is placed on the exposure glass, press the {Start} key.
Note
❒Set the original in the same direction as the first one.
CAfter all originals are scanned, press the {#}key.
To Stop Scanning Temporarily
When you are using the Sort, Stack, or Staple function, the originals are scanned into memory.
APress the {Clear/Stop}key to stop originals from being scanned into memo- ry.
To resume scanning
APress the [Resume] key to resume scanning.
Note
❒ Scanned images in memory are not cleared.
To clear scanned images of the originals
APress the [Cancel] key.
Scanning is stopped with the images cleared.
67
