Schneider Electric TSXETG100 manual ETG User Interface Overview, ETG static web pages, Setup

ConneXium™ Ethernet Gateway	63230-319-211A1
ETG User Interface OVERVIEW	2/2006

ENGLISH

ETG USER INTERFACE OVERVIEW

The ETG ships with seven pre-installed web pages used for ETG setup and configuration. See Table 1 for a description of each web page.

Table 1: ETG static web pages

ETG Web Page	Description	See
		Page
Setup
Ethernet & TCP/IP	Configure Ethernet and TCP/IP communication settings.	5
Serial Port	Set up or change serial communication parameters.	7
Device List	Identify serial devices on the daisy chain.	8
User Accounts➀	Create and edit groups and users.	10
Web Page Access➀	Select web page access rights for each user group.	11
Modbus TCP/IP Filtering➀	Set up which IP addresses can access the ETG through	12
	Modbus TCP/IP.
SNMP Parameters➀	Enable and configure the Simple Network Management	13
	Protocol (SNMP), which allows the ETG to identify itself
	to network devices requesting SNMP data.
Diagnostics
Statistics	Displays diagnostic data used to troubleshoot network	14
	problems. This page also contains information about
	your specific ETG, including the serial number,
	manufacturing date, and Media Access Control (MAC)
	address.
Read Device Registers	Allows ETG administrators to read register data from a	17
	serial device connected to the ETG.

➀Accessible by administrator only

4 © 2006 Schneider Electric. All Rights Reserved.