ConneXium™ Ethernet Gateway | |
2/2006 | Diagnostics |
|
|
Read Device Registers
| Action | Result |
|
|
|
1. | From the Diagnostics page, click Read | Opens the Read Device Registers page. |
| Device Registers. |
|
|
|
|
2. | Enter the device ID, starting register | Enters the values to begin reading registers for |
| number, and the number of registers to | the specified device. |
| read. |
|
|
|
|
3. | Click Read Holding Registers or Read | Displays the values for the listed registers. |
| Input Registers. |
|
|
|
|
4. | To change how the data is displayed in the | Selects how the data values are displayed. |
| Value column, select Decimal, |
|
| Hexadecimal, Binary, or ASCII. |
|
|
|
|
Table 7: ETG Read Device Register Settings
Option | Description | Default |
|
|
|
Device ID | The address of the device that registers are read. | 1 |
|
|
|
Starting Register | The first register to read. | 1000 |
|
|
|
Number of Registers | The number of registers to read (1 to 10). | 10 |
|
|
|
Register column | Lists the register numbers | — |
|
|
|
Value column | Lists the data stored in a register. | — |
|
|
|
Decimal, Hexadecimal, | Select an option to specify how the Value column | Decimal |
Binary, or ASCII options | data is displayed. |
|
|
|
|
Figure 13: Read Device Registers Page
ENGLISH
© 2006 Schneider Electric. All Rights Reserved. | 17 |
