Scotsman Ice service manual MDT5N25 & MDT5N40

MDT5N25 & MDT5N40

FOR THE INSTALLER: Specifications

This ice maker-dispenser is designed to be mounted on a machine stand, or a countertop, or using wall mounting kit KWB3, hung from a wall. The sink may be retained, or removed and the optional longer splash panel (KSP5) installed in place of the original. Instructions for each kit are included in this service manual.

Before beginning the installation, check that all the materials and kits required are available at the installation location.

NAMEPLATE on back panel

20.5"

4.5"

2.56"

14.06"1.88"dia

3.54" ELECTRICAL JUNCTION BOX

3/8" FPT condenser Water Inlet (Water Cooled)

3/8" Flare

Potable Water Inlet

22.5"

SPECIFICATIONS

Optional for water and			5.12"
drain lines
Serial Number Plate	1/2" FPT	12.27"	3.12" 6.43"
	Cond. Drain
inside on upper base	(Water Cooled)		1.12"

3/4" FPT Drain

Model Number	Dimensions (w/o stand)	Basic	Cond.	Ref. Charge,	Minimum Circuit	Maximum
	H” x W” x D”	Electric	Type	R-404A in ounces*	Ampacity	Fuse Size
MDT5N40A-1B	48.5 x 26 x 22.5	115/60/1	Air	24	19.3	25
MDT5N40W-1A	same	115/60/1	Water	18	17.8	20
MDT5N40W-1B	same	115/60/1	Water	17	17.8	20
MDT5N40A-6B	same	230/50/1	Air	24	11	15
MDT5N40W-6A	same	230/50/1	Water	18	10.4	15
MDT5N40W-6B	same	230/50/1	Water	17	10.4	15
MDT5N25A-1B	41 x 26 x 22.5	115/60/1	Air	24	19.3	25
MDT5N25W-1A	same	115/60/1	Water	18	17.8	20
MDT5N25W-1B	same	115/60/1	Water	17	17.8	20
MDT5N25A-6B	same	230/50/1	Air	24	11	15
MDT5N25W-6A	same	230/50/1	Water	18	11	15
MDT5N25W-6B	same	230/50/1	Water	17	11	15

* Refrigerant charge change between A and B water cooled. Always check the nameplate for charge info.

June 2002

Page 2