7.Locatethe bevelindicatorand 10-32x 3/8"long panheadscrewin loosepartsbag.

8.Usea #2 phillipsscrewdriverto attachthe bevel indicatorto the backof the frame,in the small recessbelowthetrunnion,with the 10-32x 3/8" screw.

9.Alignthebevelindicatorwiththe"0"degreemark

onthetrunnionandtightenthescrew.

Bevel

Indicator

INSTALLING THE HOSE CLIP

1.Locate the Hose Clip in the loose parts bag. Identify the barbs on the clip.

Barbs

2.Open the front cover of the saw by pulling forward

on the finger hold located on the left side of the band saw. Locate the notch in the Frame at the

sawdust ejection port.

Notch

3.Position the Hose Clip with the barbs to the back side of the band saw. Slide the Hose Clip into the notch. Push the clip until it is fully seated on the Frame. The Hose Clip will secure a Wet/Dry vac hose in place for sawdust collection.

Hose Clip

_13

Page 13
Image 13
Sears 113.244530 owner manual Installing the Hose Clip