Seiko 7K32 manual Button B Ex hPa/Approxi- mately 1,000m, Know the approximate altitude

Button B

(Ex.) 903hPa/Approxi- mately 1,000m

00 1

0

	m
	0
	0
5
	50
	9
	0
9	0

0 1000

9 0 1

82

7 3

×1hPa 6 5 4

A
L
	T
		I.
10			5
50			5
	hP			0
		a		0
			5	5
			0
			0
				0
				0
				0

〈How to erase the minimum atmospheric pressure in memory〉

・The minimum atmospheric pressure in memory can be erased as required. ・To record the minimum atmospheric

pressure obtained in a certain period
of time, the previous measurement in			Button C
memory should be erased before Button B	0	A
			L

	0								5			4
0	5								5
	8								0
0												5
5												0
	8											0
1									0			4
	0						6	0			0
	0									0
The altitude scale indicated by barometer hand “1” shows0the maximum approximate altitude.
	0	7							0
	0	50
	0			700		65	3
	2									know the approximate altitude”.)
		(Refer			to “To0
		0				0	5
		0	5		3
			2	000

※When the watch is first used after purchased, a value of approximately 700hPa may be stored in memory. It is the result of the function test made at the factory, and erase it from memory before use. (Refer to “How to erase the minimum atmospheric pressure in memory”.)

※If button B is pressed while the 5-second interval measurement mode is used, it is canceled and the minimum atmospheric pressure measured is displayed. To continue it, press button C again.

(2)The barometer hands indicate the minimum atmospheric pressure for approximately 1 minutes and then automatically move to indicate the current atmospheric pressure.

※If button B is pressed while barometer hands indicate the minimum atmospheric pressure, they move to indicate the current atmospheric pressure.

※If button C is pressed while barometer hands lndicate the minimum atmospheric pressure, the 5- second interval measurement mode is started and the barometer hands indicate the current atmospheric pressure.

	→					m							TI							→
making new measurements.						0		1	000
					0						10			.
			5			50								5
●Press button C while keeping						9			0			50			5
								9		1			hP			0
		0					8				2			a		0
	0													5
button B pressed. A confirmation			9	0	0		7				3			0				5
								6		4				0
	0																	0
sound beeps and the minimum	1					24													0
			0													5			0
atmospheric pressure retained in	0		5		18		6				L A N D					5			4
			8							M A S T E R						0
	0					12					TITANIUM								5
	5							12											0
memory is erased.	1																		0
			8												0
			0																4	Set crown “1”
Set crown “1” at the normal			0				9	ALARM			3			6	0		0	0
		0														0
position.			0			7			6				0							at the normal
			0			5						5
							0			0		6		3
			2					70
														5						position.
						0							0
									0003			0
						052

Press button C while keeping button B pressed.

73 74