Manuals / Brands / Home Audio / Home Theater System / Sennheiser / Home Audio / Home Theater System

Sennheiser EM 3731-II, EM 3732-II 01.01CH, 776.000 Hz, Overview of the displays

1 50

Download 50 pages, 7.53 Mb

Product overview

Overview of the displays

After switch-on, the receiver displays the “Bank/Channel” status display. For further illustrations and examples of the different status displays, refer to page 38.

Each display provides information on the operating states of the receiver and those of the received transmitter.



	A RF B	% DEV	M
	300	PEAK	776.000 Hz
	100	100	01.01CH
	30	50		AF	COM
	10
			BANK
	∝V	10

Reception display

RF level display “RF” for antenna A

Diversity display (antenna A or antenna B active)

RF level display “RF” for antenna B

Audio level display “DEV”

Display for the squelch threshold

For additional information, refer to page 10.

Status display

Frequency display

“MHz” – appears when the frequency is displayed

6-step transmitter battery status display

Command display (status display for the audio outputs AF and Command)

(EM 3732-II COM twin receiver only)

Display for the current frequency bank and channel or the name

For additional information, refer to page 11.

Brightness control

The display has an automatic brightness control. The brightness is dimmed after the last button press. With each new button press, the display lights up with full brightness.

Triggers for dimming	after	Behavior of the display
No operation	60 s	Display is slightly dimmed
Squelch not reached	20 min	Display goes off

9

Contents

Instruction manual Contents Important safety instructions Page Page The product family The frequency bank system Delivery includes Product overview Overview of the displays 776.000 Hz 01.01CH Reception display Mute NAME AF COM COM Putting the receiver into operation Slide the receiver into the 19" rack Secure the rack mount “ears” Connecting the antennas CAUTION! Danger of short-circuitdue to uninsulated antennas even when you switch the receiver off Page Daisy chaining receivers Connecting the receiver to the mains/ disconnecting the receiver from the mains CAUTION! Damage to the device due to electric current Ensure a reliable mains ground connection of the receiver – especially when you are using multi-outletpower strips or extension cables Plug the mains connector into the wall socket Connecting devices with AES3 digital input Connecting an external word clock generator Scanning Using the receiver Deactivating the lock mode Synchronizing a transmitter with the receiver frequency Identified Sorting channels using the “Wireless Systems Manager” software Using the operating menu 776.000 Hz Working with the operating menu esc 777.005MHz 848.225MHz Setting mode +12 dB +18 dB save NAME B.CH press and hold Adjustment tips for the operating menu CEL .16 CEL Repeat the last two steps to enter the remaining characters After you have entered the six characters of the name, press the save button Adjusting the squelch threshold To adjust the squelch threshold: After you have adjusted the desired squelch threshold, press the save button Page Page Page Page Before starting the scan, switch all transmitters of your system Turn the jog dial 7 until the arrow points to “Scan new” Press the jog dial 7 to start the scan Releasing channels that are used or subject to interference Turn the jog dial 7 until the arrow points to “Scan reset” NAME 01.01CH 03.03CH NAME Auto Page Cleaning the receiver Additional information Diversity reception If a problem occurs Accessories Specifications Page Manufacturer Declarations