Sennheiser EM 3731-II, EM 3732-II Adjustment tips for the operating menu, CEL, 776. B.Ch

Adjustment tips for the operating menu

776. B.Ch

000 1.01

Tune Ban

B.Ch 776.

U.01 000

MHz

776 960

UHFMHz

Adjustment tips for the operating menu

The following adjustment tips apply to the operating menus of all receivers of the product family.

Setting the receiving frequency

Via the “Tune” menu, you can:

•set the receiver to a receiving frequency that can be freely selected within the preset frequency range. The receiving frequencies are tuneable in 5-kHz steps within the switching bandwidth of 184 MHz max. If you want to use a receiving frequency from the enclosed frequency tables instead, see “Selecting a frequency bank and a channel” on page 30

•change and store the receiving frequencies in the 60 channels of the frequency bank “U” (see page 31)

Change to the setting mode of the “Tune” menu.

The first three digits of the receiving frequency start flashing.

		7 8
DEV	M	save digital audio
	777.005 Hz	processing
	U.01 CH	sync
	BANK AF COM	esc

sync

	77.	B.Ch	CEL
	05	1.01	CEL
	MHz	Bank.Ch	Nam
	une	Bank.Ch	Nam
			B.Ch
	776.000MHz		1.
		7 8
DEV	M		save digital audio
	777.005 Hz		processing
	U.01 CH	esc	sync
	BANK AF COM	esc

sync

Change the first three digits of the receiving frequency by turning the jog dial 7.

Confirm the first three digits of the receiving frequency by pressing the jog dial 7.

The last three digits of the receiving frequency start flashing.

Change the last three digits of the receiving frequency by turning the jog dial 7.

After you have selected all six digits of the receiving frequency, press the save button 8.

The receiving frequency is set and automatically stored on the channel “01” of the frequency bank “U”, i.e. the previously stored frequency is overwritten. The display changes to the selection mode of the operating menu.

Selecting a frequency bank and a channel

Via the “Bank.Ch” menu, you can select a frequency bank and a channel from the enclosed frequency tables.

Change to the setting mode of the “Bank.Ch” menu. The number of the frequency bank starts flashing.

Select the desired frequency bank by turning the jog dial 7.

Confirm the frequency bank by pressing the jog dial 7. The number of the channel starts flashing.

Select the desired channel by turning the jog dial 7.