Adjustment tips for the operating menu
Scanning the frequency banks for
Via the “Scan” menu, you can scan all frequency banks for free channels.
1
Scan Displ
Channel list
Scan new
Scan reset
Freq. occupied B.Ch
776.000 MHz 1.
Channel list
Scan new
Scan reset
Bank 1 2 3
Free 43 40 42
Bank 4 5 6 U
Free 32 31 33 60
| 7 8 |
|
DEV | M | save digital audi |
| 777.005 Hz | processing |
| U.01 CH | sync |
| BANK AF COM esc |
|
|
| sync |
| Freq. occupied | B.Ch |
776.000 MHz 1.
Change to the setting mode of the “Scan” menu. The following selection appears:
–“Channel list”
displays the number of free channels for each frequency bank from the last scan.
–„Scan new”
scans all frequency banks and displays the number of free channels for each frequency bank.
–„Scan reset”
releases channels that were occupied or subject to interference during the last scan (these channels a marked with a warning triangle and “Freq. occupied”.
Displaying a list of all free channels
Via the “Channel list” menu, you can display the last scan result. You can then select a suitable frequency bank and a channel.
Turn the jog dial 7 until the arrow points to “Channel list”.
Press the jog dial 7.
A table displays the number of free channels for each of the seven frequency banks.
Turn the jog dial 7to select a frequency bank with a sufficient number of free channels.
Press the save button 8.
The selected frequency bank is automatically called up in the “Bank.Ch” menu.
Select a channel from this frequency bank (see “Selecting a frequency bank and a channel” on page 30).
After the scan, the channels that are occupied or subject to interference are marked with a warning triangle and “Freq. occupied”.
36