M

776.000 Hz

01.01BANK AF COM

CH

776. B.Ch

000 1.01

MHz

Tune Ban

776. B.Ch

000 1.01

MHz

Tune Ban

B.Ch 776.

U.01 000

MHz

776 960

UHFMHz

B.Ch 777.

U.01 225

MHz

776 960

UHFMHz

Using the operating menu

Working with the operating menu

By way of example of the “Tune” menu, this section describes how to use the operating menu.

After switching the receiver on, the status display is shown on the display panel.

Getting into the operating menu

￿Press the jog dial 7.

The status display is replaced by the operating menu.

The “Tune” menu is displayed together with its current setting. The position of a menu within the operating menu is illustrated by a graphic in the upper display margin (the “Tune” menu is on the very left of the operating menu).

Selecting a menu

￿Turn the jog dial 7until the icon of the desired menu is in the center of the display.

￿Press the jog dial 7to get into the setting mode of the selected menu.

The icon of the menu is displayed and the current setting starts flashing. In addition, the green backlighting of the save button 8 flashes.

Adjusting a setting

￿Turn the jog dial 7 until the desired setting appears.

￿Press the jog dial 7 to confirm the selected setting.

Depending on the selected menu, the next setting that can be changed and confirmed by turning and pressing the jog dial 7 flashes.

Storing a setting

￿Press the save button 8 to store the setting.

An animation appears on the display, indicating that the setting has been stored. The display then changes to the selection mode of the operating menu.

Exiting the operating menu/cancelling an entry

You can exit the operating menu or cancel an entry at any time.

M

6.000 Hz

save clock

￿ Press the esc button 6.

An animation appears. The display then returns to the previous menu

.01BANK AF COM esc

CH

sync

level. To return to status display, you may have to press the

esc button 6 several times in succession.

6

25