Sennheiser EM 3731-II, EM 3732-II 36

		1
		AF
		AF COM
		7 8
DEV	M	save digital audio
	777.005 Hz	processing
	U.01 CH	sync
	U.01 CH	esc
	BANK AF COM	esc

sync

mmand More

Adjustment tips for the operating menu

Via the “Command” menu, you can determine which of the audio and command outputs will be switched on and off when the command button on the transmitter is pressed. There are four configuration options:

WHEN the “Command”

… AND the

… THEN the receiver’s

menu of the receiver is

command button

audio outputs are

configured as shown …

on the transmitter

switched ...

is …

AF Out:

on

1

not pressed

AF

Command: off

AF

AF Out:

on

AF

COM

pressed

AF

Command: on

COM

AF Out:

on

2

not pressed

AF

Command: off

AF

AF Out:

off

COM

pressed

Command: on

COM

AF Out:

on

3

not pressed

AF

Command: on

COM

AF

COM

pressed

AF Out:

off

COM

Command: on

COM

AF Out:

on

4

not pressed

AF

Command: on

COM

AF

COM

AF Out:

on

AF

COM

pressed

AF

Command: on

COM

The active output lights up in the command display; muted outputs are not displayed (see “Command display (status display of the audio outputs AF and Command)” on page 12).

Change to the setting mode of the “Command” menu. The current configuration starts flashing.

Select one of the four configurations by turning the jog dial 7.

If you do not want to use the command function, select the configuration “4”.

Press the save button 8.

The selected configuration is stored. The display changes to the selection mode of the operating menu.

Changing to the extended menu

Via the “More” menu, you can change to the extended menu with the menus “Scan”, “Display”, “IP-Addr”, “MAC”, “Standby” and “Reset”.

35

Contents

Instruction manual Contents Important safety instructions Page Page The product family The frequency bank system Delivery includes Product overview Overview of the displays 776.000 Hz 01.01CH Reception display Mute NAME AF COM COM Putting the receiver into operation Slide the receiver into the 19" rack Secure the rack mount “ears” Connecting the antennas CAUTION! Danger of short-circuitdue to uninsulated antennas even when you switch the receiver off Page Daisy chaining receivers Connecting the receiver to the mains/ disconnecting the receiver from the mains CAUTION! Damage to the device due to electric current Ensure a reliable mains ground connection of the receiver – especially when you are using multi-outletpower strips or extension cables Plug the mains connector into the wall socket Connecting devices with AES3 digital input Connecting an external word clock generator Scanning Using the receiver Deactivating the lock mode Synchronizing a transmitter with the receiver frequency Identified Sorting channels using the “Wireless Systems Manager” software Using the operating menu 776.000 Hz Working with the operating menu esc 777.005MHz 848.225MHz Setting mode +12 dB +18 dB save NAME B.CH press and hold Adjustment tips for the operating menu CEL .16 CEL Repeat the last two steps to enter the remaining characters After you have entered the six characters of the name, press the save button Adjusting the squelch threshold To adjust the squelch threshold: After you have adjusted the desired squelch threshold, press the save button Page Page Page Page Before starting the scan, switch all transmitters of your system Turn the jog dial 7 until the arrow points to “Scan new” Press the jog dial 7 to start the scan Releasing channels that are used or subject to interference Turn the jog dial 7 until the arrow points to “Scan reset” NAME 01.01CH 03.03CH NAME Auto Page Cleaning the receiver Additional information Diversity reception If a problem occurs Accessories Specifications Page Manufacturer Declarations