Servis 15 16, WATER SUPPLY CONNECTION, DRAIN HOSE CONNECTION

15 16
T: 0800 0124 382 T: 0800 0124 382
INSTALLATION
WATER SUPPLY CONNECTION
2 Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold w ater tap until hand
tight (fig 8). Take care not to trap or kink the hose.
DRAIN HOSE CONNECTION
Do not connect your Washer Dryer to a surface water dr ain.
Connect your Washer Dryer to your household drainage system (f ig 9).
For your Washer Dryer to function properly the outlet en d of the drain hose must be at a
minimum of 60cm and a maximum of 100cm from the ground.
CAUTION: Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extr a sections.
Figure 8
Figure 9
a:
b:
Max height 80cm
Min height 0cm
a: The drain hose
can be connected
to a standpipe, as
shown. The hose
must be between
0cm and 80cm
from the ground.
b: The drain hose
can be connected
to a household
sink, as shown.
The hose must be
between 60cm to
100cm from the
ground.