77 78
T: 0800 0124 382 T: 0800 0124 382
TROUBLESHOOTING
AUTOMATIC DETECTION SYS TEM
Your Washer Dryer is equipped with a built-in fault detection sys tem, which is able to offer
guidance should your machine not operate as expected. T he most common error codes are
shown below. If your machine displays a code not shown, con sult the Servis helpdesk.
Possible Fault: Pum p is damaged, pump filter is clogged or the elect rical pump connection
is malfunctioning.
Solution: Clean the pump filter. Contact the Servis helpdesk if t he problem persists.
Possible Fault: Your Washer Dry er has an excessive amount of water.
Solution: Turn off your Washer Dryer unplug it and call the Servis helpdesk.
Possible Fault: No wa ter supply or low mains water pressure
Solution: Check that the water supply is turned on, Che ck that the inlet hose is not kinked
or twisted, Clean the inlet hose and filters
If the problem persists, unplug your Washer Dryer, turn of f your water supply and contact the
Servis helpdesk
Possible Fault: Th e pump is damaged, the pump filter is clogged or t he electrical pump
connection is malfunctioning.
Solution: clean the pump filter, check the drain hose for kinks and twists. I f the problem
persists contact the Serv is helpdesk.