63 64
T: 0800 0124 382 T: 0800 0124 382
MAINTENANCE

Filters:

Water Inlet Filters:
Water inlet filters prevent dirt and foreign mat erials from entering your machine. It is
recommended that these filters are clean ed when your machine is unable to receive suf ficient
water, although your water supply is on and the tap is open.
To clean the water inlet filters:
1 Unscrew the water inlet hose from the Washer Dry er by turning the hose anti-clock wise
and gently pulling.
2 To remove the water inlet filter from the water inlet valve, use a pair of long- nosed pliers to
gently pull on the plastic bar in the filter (fig 24).
Figure 24
3 Clean the filter thoroughly with a soft brush, wash with s oapy water and rinse thoroughly.
4 Re-insert the filter by gently pushing it back into place.
A second water inlet filter is located in the t ap end of the water inlet hose.
To remove the second water inlet filter:
1 Use a pair of long-nosed pliers to gently pull on the plastic bar in the filter.
2 Clean the filter thoroughly with a soft brush and wash with so apy water and rinse
thoroughly.
3 Re-insert the filter by gently pushing it back into place.

Pump Filter:

The pump filter system in your Washer Dryer prolo ngs the life of the pump by preventing lint
from entering your machine. We recommend that yo u clean the pump filter every 2-3 month s.
The pump filter is located behind the cover on the f ront lower-right corner.
CAUTION:
The water in the pump may be hot, wait for it cool b efore carrying out any
cleaning or maintenance.