Sharp AL-1215 Multi-bypass tray AL-1551CS, Open the multi-bypass tray and extend the tray

BYPASS FEED (including special paper)

The multi-bypass tray (AL-1551CS) or the single bypass (AL-1215/AL-1530CS/AL- 1540CS) can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Paper measuring from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 lbs. to 34.5 lbs. (52g/m2 to 128g/m2) can be used in this tray. (For paper weighing from 28 lbs. to 34.5 lbs. (105g/m2 to 128g/m2), 8-1/2" x 11" is the maximum size.)

•The multi-bypass tray (AL-1551CS) can hold maximum of 50 sheets

of paper. (Capacity will vary depending on the type of paper loaded.) The single bypass (AL-1215/AL-1530CS/AL-1540CS) can hold one sheet of paper.

• The original image must be smaller than the paper or media for

copying. If the original image is bigger than the paper or media, this	3
may cause smudges on the edges of the copies.

The multi-bypass tray (AL-1551CS)

1 Open the multi-bypass tray and extend the tray.

To close the multi- bypass tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click.

2 Set the paper guides to the paper width. Insert the paper (print face down) all the way into the multi-bypass tray.

Print face

17