3 Double-click the "setup" ( 
) icon.
If the language selection screen appears after you double click the "setup" icon, select the language you wish to use and click the "Next" button. (Normally, the correct language is selected automatically.)
4 Select the software packages to be installed, and then click the "Next" button.
The software packages with checkmark ( 
) on the list on the screen will be installed.
Click the "Display README" button to show the information on the selected package.
•If you are using the parallel interface connection, do not select the
Button Manager checkbox because this feature is not supported with the parallel interface.
•If the following screen appears, click the "OK" button. Review the contents in "BEFORE INSTALLATION" (p.20), and then select only appropriate the software packages to be installed.
5 Review the software packages to be installed on the screen, and then click the "Start" button.
The software packages to be installed will be displayed on the screen. If inappropriate packages are displayed, click the "Back" button to select appropriate packages again.
6 Copying files for MFP driver installation (This step will start if it was selected in step 4).
1After confirming the message in the "Welcome" window, click the "Next" button.
2A dialog box appears asking you to verify that the USB or parallel interface cable is not connected to the MFP. Make sure that the interface cable is not connected and click the "Next" button.
22
