Sharp AR-157E, AR-153E operation manual Outline of Button Manager, CONTENTS 21 INDEX

3 Outline of Button Manager

Button Manager is a utility software to link scanning functions to the SCANNER key on the unit. This software enables you to set scanning functions to six different scan menus, which will be linked the SCANNER key on the unit.

Reference: To begin scanning using the unit's operation panel, settings must be established in the Control Panel after the Button Manager is installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's operation panel, see "USING THE SCANNER MODE" in the Operation Manual.

The functions of Button Manager are shown below.

Tab

Click to set scan menu options.

"OK" button

Click to save your settings, and exit the dialog box.

"Cancel" button

Click this button to exit the dialog box without making any changes to the settings.

"Scan Setup" area

Set the scan conditions.

Some applications may limit your choice of settings.

Note

"Application Selection" area

Select the start-up application here.

"Help" button

Click this button to display the help file for Button Manager.

"Apply" button

Click to save your settings without closing the dialog box.

You can specify and change your six scan menu options from six functions. Refer to Button Manager Settings to specify and change the scan menu options.

Close the source application before using the SCANNER key on the unit.

Note

CONTENTS 21 INDEX