Sharp AR-157E, AR-153E operation manual Maintenance, Toner Cartridge Replacement

5 MAINTENANCE

This chapter describes how to replace the toner cartridge and how to clean the unit.

Be sure to use only genuine SHARP parts and supplies.

For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.

TONER CARTRIDGE REPLACEMENT

When the toner cartridge replacement required ( ) indicator lights up, replacement of the toner cartridge will be needed soon. Obtain a new cartridge. When the toner cartridge replacement required ( ) indicator blinks, the toner cartridge must be replaced before copying can be resumed. Replace the toner cartridge by following the procedure below.

During long copy run of a dark original, the start () indicator may

blink, the indicator light up, and the unit stop, even though toner is left. 5 The unit will feed toner up to 2 minutes and then the start () indicator

will light up. Press the start ( ) key to restart copying.

1

2

Open the multi-bypass tray, and then open the side cover while pressing the side cover open button.

Push gently on both sides of the front cover to open the cover.

25