Sharp AR-153E Displaying Total Number Of Copies, Press the clear key to reset the display to zero

Program	Mode		Parameters
No.
1	Auto clear time	0	OFF, 1	10sec., 2	30sec.
		*3	60sec., 4	90sec., 5	120sec.
2	Preheat mode	*0	30sec., 1	60sec., 2	90sec.
3	Auto power shut- off	0	2min., *1	5min., 2	15min.,
	timer	3	30min., 4	60 min., 5	120min.
4	Stream feeding	0	OFF, *1	ON
	mode
5	Auto power shut- off	0	OFF, *1	ON
	mode
6	Resolution of AUTO	*0	300dpi, 1	600dpi
	& MANUAL mode

* Factory default settings are indicated with an asterisk (*).

Program No. 4 can be used when your unit has the RSPF/SPF.

5 Press the start () key. The right-hand number in the display will be steadily lit and the entered value will be stored.

To change the setting or to set another mode, press the clear () key. The unit will return to step 2.

6 Press the light () or dark () key to return to the normal copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.

1

2

Press the clear () key to reset the display to zero.

Press and hold down the clear () key for approximately 5 seconds. The total number of copies will appear in two steps, each with three digits.

Example: Total number of copies is 1,234.

24