Sharp AR-157E, AR-153E operation manual Making two-sided copies, Select two-sided copy mode, A B C

Making two-sided copies

1

2

Place the original(s) on the original table or in the RSPF. (see "ORIGINAL PLACEMENT" (p.14).

Select two-sided copy mode.

A:When copying in a one-sided to two-sided mode:

Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 20.

B:When copying in the two-sided to two-sided mode:

Use the original to copy key to select the two-sided to two-sided copying mode. The originals must be set in the RSPF before this mode can be set in step 3 on page 15.

C:When copying in the two-sided to one-sided mode:

Use the original to copy key to select the two-sided to one-sided copying mode. The originals must have been set in the RSPF in step 3 on page 15.

4

A B C

3 Select the copy settings. See "SET THE COPY QUANTITY" (p.16), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.16), and "REDUCTION/ENLARGEMENT/ZOOM" (p.18).

Using the original table

If you are using the original table, copying is only possible in one sided to two-sided mode ("A" above).

1Press the start ( ) key.

The original is scanned into the unit's memory and the number of the copy quantity blinks in the display.

2Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again.

Copying begins.

Using the RSPF

Press the start ( ) key. Copying begins in the selected two-sided copy mode.

21