Sharp AR-153E, AR-157E operation manual Operation Panel

OPERATION PANEL

1Original to copy key and indicators (AR-157E)

Two-sided copies from one-sided originals. Turn on Long Edge or Turn on Short Edge can be selected.

Two-sided copies from two-sided originals. (Can be selected only when the RSPF is used.)

Single-sided copies from two-sided originals. (Can be selected only when the RSPF is used.)

2Exposure mode selector key and indicators

Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p.16)

3Light and dark keys and indicators Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. (p.16) Use to start and terminate user program setting. (p.23)

4Alarm indicators

Developer replacement required indicator (p.37)

Misfeed indicator (p.32)

Toner cartridge replacement required indicator (p.25)

Maintenance indicator (p.37)

5RSPF/SPF indicator (p.15)

Can be used only when your unit has the RSPF/SPF.

6RSPF/SPF misfeed indicator (p.35) Can be used only when your unit has the RSPF/SPF.

7Copy ratio selector key and indicators

Use to sequentially select preset reduction/enlargement copy ratios. Selected copy ratio is shown by a lit indicator. (p.18)

8Copy ratio display (%) key (p.18)

9Display

Displays the specified copy quantity, zoom copy ratio, user program code, and error code.

10SCANNER key and indicator (p.53, p.60)

Can be used when the Printer/Scanner Expansion Kit (AR-PG2) is installed.

11ONLINE key and indicator (p.53) Can be used when the Printer/Scanner Expansion Kit (AR-PG2) is installed.

12Power save indicator

Lights up when the unit is in a power save mode. (p.22, p.23)

13Paper feed location indicators

Light up to show the selected paper feed station.

14Tray select key

Use to select a paper feed station (paper tray 1, paper tray 2 or multi-bypass tray) (p.19)

15ZOOM keys and indicator Use to select any reduction or enlargement copy ratio from 25% to 400% in 1% increments. (p.18)

16Copy quantity keys

•Use to select the desired copy quantity (1 to 99). (p.16)

•Use to make user program entries. (p.23)

17Clear key

•Press to clear the display, or press during a copy run to terminate copying. (p.16)

•Press and hold down during standby to display the total number of copies made to date. (p.24)

18Start key and indicator

•Copying is possible when the indicator is on.

•Press to start copying.

•Use to set a user program. (p.23)

6