Sharp AR-CF2 LED indication on operator panel, LED LED1 LED2 LED3 LED4, Start LED Mode LED

1: Jan. 9 2004

The correspondence between the punching/stapling mode settings and LEDs is shown below.

Punch		Staple mode LEDs				Stapling mode
LED	LED1		LED2	LED3	LED4
❍	●		❍	❍	❍	1-point stapling at back
❍	❍		●	❍	❍	2-point stapling
❍	❍		❍	●	❍	1-point stapling at front
❍	❍		❍	❍	●	Saddle stapling (saddle stitching)
●	❍		❍	❍	❍	Punching
●	●		❍	❍	❍	Punching + 1-point stapling at back
●	❍		●	❍	❍	Punching + 2-point stapling
●	❍		❍	●	❍	Punching + 1-point stapling at front

∗●: means "Lit."

1

1

1

1

1

5. LED indication on operator panel

Status	Cause	Explanation	START LED		MODE LED
			Red	Green
Empty tray					The selected MODE LED is lit.
	Inserter problem
	Finisher problem
	Paper jam in inserter		Lit		The LED of the selected mode is lit.
	Paper jam in finisher		Lit		The LED of the selected mode is lit.
	Inserter alarm				The LED of the selected mode is lit.
	Finisher alarm				The LED of the selected mode is lit.
	Open inserter cover				The LED of the selected mode is lit.
	Open finisher cover				The LED of the selected mode is lit.
	Offline operation disabled
	Inserter tray specified stapling				The LED of the selected mode is lit.
	mode non-usable
	Punching non-usable
	Operation mode Stapling disabled				The LED of the selected mode is blinking.
	Punching disabled
	Full tray (considered as a kind of				The LED of the selected mode is lit.
	finisher alarms)
	Other
Paper-loaded tray				Lit	The LED of the selected mode is lit.
(Operable)
Paper-loaded	Inserter problem		Lit
tray(Non-operable)	Finisher problem		Lit		The LED of the selected mode is lit.
	Paper jam in inserter		Lit
	Paper jam in finisher		Lit		The LED of the selected mode is lit.
	Inserter alarm		Blinking		The LED of the selected mode is lit.
	Finisher alarm		Blinking		The LED of the selected mode is blinking.
Paper-loaded tray	Open inserter cover				The LED of the selected mode is lit.
(Non-operable)	Open finisher cover				The LED of the selected mode is lit.
	Incompatible paper size	A non-usable paper size "A4			The LED of the selected mode is lit.
		lateral," etc. is added when	Blinking
		the saddle mode is selected:
		Extra size
	Offline operation disabled
	Inserter tray specified stapling	The selected mode is non-			The LED of the selected mode is blinking.
	mode non-usable	usable.
	Punching non-usable
	Operation mode Stapling disabled	The selected mode is			The LED of the selected mode is blinking.
	Punching disabled	disabled.
	Full tray (considered as a kind of	The tray corresponding to	Blinking		The LED of the selected mode is blinking.
	finisher alarms)	the selected mode is full.
	Over loaded		Blinking		The LED of the selected mode is blinking.
	Paper loaded in the finisher		Blinking		The LED of the selected mode is lit.
	intermediate process tray
	Other	Main unit status "operation			The LED of the selected mode is lit.
		disabled," finisher status
		"non-operable," etc.
Waiting for start of		After a user presses the		Blinking	The LED of the selected mode is lit.
offline operation		START switch
In offline operation				Blinking	The LED of the selected mode is lit.

Note: For LED status, each blank means "not lit."

AR-CF2 OPERATIONAL DESCRIPTION 4 - 5