BEFORE OPERATING

Before operating your oven, make sure you read and understand this operation manual completely.

Before the oven can be used, follow these procedures:

1.Ensure the drip tray is in the correct position. See page 8.

2.See below for getting started.

Getting Started

Your oven has an Energy Save Mode. This facility saves

BEFORE USING OF THE FIRST TIME, CLEAN THE OVEN

You may detect smoke or a burning smell when using the grill for the first time, this is normal and not a sign that the oven is out of order.

To avoid this problem, when first using the oven, operate the grill without food for 20 minutes.

PREPARATION

Ensure the room is well ventilated.

P R O C E D U R E

1Ensure that no food is in the oven.

electricity when the oven is not in use.

P R O C E D U R E

1Plug the oven into a power point.

Nothing will appear on the display at this time.

Enter the time by pressing TIME (20.00).

2 Press GRILL and

START/AUTO

MINUTE.

x 2

2 Open the door. The display will show ".0".

The oven lamp will light while the door is open.

3Close the door.

Now you are ready to use the oven.

CAUTION:

In Energy Save Mode, if you do not operate the oven for 3 minutes or more (e.g. after closing the door, or pressing STOP/CLEAR, or at the end of cooking), you will not be able to operate the oven until you open and close the oven door again.

NOTE:

When you set Child Lock or Demonstration Mode, En- ergy Save Mode will be cancelled temporary.

STOP/CLEAR

1.Press STOP/CLEAR if you make a mistake during programming.

2.STOP/CLEAR can be used to stop the oven temporarily during cooking.

3.To cancel a programme during cooking, press twice.

x 1

x 1

WARNING:

The oven door, outer cabinet and oven cavity will become hot.

11

Page 13
Image 13
Sharp AX-1110(SL)M Before Operating, Getting Started, Preparation, START/AUTO Minute, Open the door. The display will show