Playback
Before Starting Playback
Loading the Batteries in the Remote Control
1Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.
NOTE
•Do not subject the remote control unit to shock, water or excessive humidity.
•The remote control unit may not function if the Player’s remote sensor is in direct sunlight or any other strong light.
•Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.
•Do not mix old and new batteries, or mix different brands.
•Remove the batteries if you will not use the remote control unit for an extended period of time.
Connecting the Power Cord
Plug the AC cord into AC outlet.
2 Load the two “AA” size batteries | Approximate operating range of | |||
remote control | ||||
corresponding to the m and n indications in |
|
|
|
|
|
|
|
| |
battery compartment. | Remote control sensor | |||
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
• Place the Player close to the AC outlet, and keep the |
power plug within reach. |
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT |
TOUCH THE |
WHILE THE AC CORD IS CONNECTED. |
• The POWER (ON/STANDBY) indicator blinks while the |
Player is preparing for starting up. You cannot turn the |
Player on until the POWER (ON/STANDBY) indicator |
stops blinking. |
Playback
3Insert the smaller tab of the battery cover into the opening 1, and press down on the cover until it clicks in place 2.
WARNING
•Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater.
This can cause batteries to leak, overheat, explode or catch fire.
It can also reduce the life or performance of batteries.
| 15º | *Approx. 22 feet (7m) |
|
| |
30º |
| 30º |
| 15º |
|
Remote control unit
• If you are not going to use this Player for a long period |
of time, be sure to remove the AC cord from the AC |
outlet. |
21