SETTINGS

NOTE

When you insert or remove a USB memory device,

7 Enter the 4-digit number using 0–9.

• Only USB memory devices formatted with FAT 32/16 are

be sure to turn the main power off and make sure

 

 

that “Quick Start” is set to “No” (See page 47).

 

 

compatible.

 

 

1

Insert the USB memory device with the update

 

Enter 4-digit password

When formatting a USB memory device using a PC,

 

perform the following settings.

 

file into the USB1 or USB2 terminal on this

 

 

Format File System: FAT32

 

player.

 

 

Allocation Unit Size: Default Allocation Size

 

• It is recommended that the USB memory device be

 

 

• Do not extract the firmware update file to any folders

 

connected to the USB2 terminal on the front of the

8 Press ENTER to start checking data in the USB

other than the root directory on the USB memory

 

player.

device. The firmware update file must be only one file

 

 

memory device.

directly in the root directory.

Front

 

 

 

 

 

Insert USB memory device containing

 

 

 

the software update file.

 

 

 

 

OK

 

 

USB memory

9 During the data checking, “Checking” blinks.

 

 

device

 

 

USB2 terminal

 

 

 

2

Press POWER to turn on the power.

Now checking the data in USB memory device.

 

3 Press c/dto select “Settings”, then press bor

 

 

 

 

ENTER.

 

Checking

 

4

Press c/dto select “Software Update

 

 

 

 

 

5

Settings”, then press bor ENTER.

• The current version of this unit software and the

 

Press a/bto select “Manual Update”, then

 

version of the update file on the USB memory

 

6

press dor ENTER.

device are displayed. To update this player software

 

Press a/bto select “USB Memory”, then press

with update file, select “Yes”, and press ENTER.

 

 

ENTER.

Software update file is detected in the USB memory device.

 

 

• If you have not yet set the password, go to step 8.

 

 

 

Start update?

 

 

 

 

Current Ver. :

xxxxxxxxxx

CAUTION

 

 

Update Ver. :

yyyyyyyyyy

 

 

 

Yes

• Do not remove the USB memory device or unplug the

 

 

 

 

 

 

No

AC cord while the software is being updated.

 

 

 

(Continued on the next page)

Settings

57