Sharp BD-AMS10U, BD-AMS20U, BDAMS20 Manual Update from Network, Manual Update from USB memory, device

SETTINGS

			1 Press c/dto select “Settings”, then press bor			6 Press ENTER to start updating.
	Manual Update from Network
			ENTER.
							Downloading latest firmware…
This function allows you to perform the update			2 Press c/dto select “Software Update
							Version : yyyyyyyyyy
operation by accessing an Internet connection			Settings”, then press bor ENTER.
manually to check if there is a new firmware version.			3 Press a/bto select “Manual Update”, then
		NOTE	press dor ENTER.					30%
			4 Press a/bto select “Network”, then press
• Make sure that the LAN cable or the wireless LAN
		adapter is connected to this player and make sure that	ENTER.			7 When the software is successfully updated, a
		the wireless router/access point is connected to the	5 During access to the network and checking the			screen is displayed indicating that the update
		Internet if using the wireless LAN adapter. (See pages	latest version of firmware, “Accessing” blinks.			process is completed.
		19–20.)	• The current version of this unit software and the			• If the update has failed, an error message appears.
• Make sure to perform the communication settings. (See
				latest version of the update file on the network are		Retry the update after checking if the broadband
		pages 50–53.)
				displayed when latest version of firmware has been		Internetconnection(pages19–20)andcommunication
• It may take time to access and download the update
				found.		settings (pages 50–53) are performed properly.
		depending on the Internet connection and other factors.
				To update this player software with update file,		8 Press POWER to turn off the player.
		CAUTION		select “Yes”, and go to step 6.
						Manual Update from USB memory
• Do not remove the LAN cable or the wireless LAN				Latest version of firmware has been found.
				Firmware update is available.		device
		adapter or unplug the AC cord while downloading or
		updating software.		Proceed with update?	xxxxxxxxxx
				Current Version :		This function allows software updates by inserting
				Latest Version :	yyyyyyyyyy	a USB memory device with the update file into the
				If “Yes” will be selected, version update will start.
						USB1 or USB2 terminal on this player.
					Yes	• When a software update is performed, the software
					No	update data must be written onto the USB memory
						device in advance using a PC.
			• If the Internet connection has failed, an error			• The USB memory device must be clear of all files
						except software update data to allow new software
				message appears.
						uploading.
				Retry the update after checking if the broadband		To check for the availability of a software update,
				Internetconnection(pages19–20)andcommunication
						visit www.sharpusa.com/products/support/. If
				settings (pages 50–53) are performed properly.

you have any questions, please call 1-800-BE- SHARP (800-237-4277).

• When software update data is released, copy the data onto a USB memory device after downloading it to a PC.

• For methods such as downloading and copying to a USB memory device, carefully read the description shown on the website before performing the operation.

56