SETTINGS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Update process

 

 

 

 

Software Update Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 When this player is turned on, the Internet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In this player, the software version can be updated

 

 

 

 

 

 

 

 

 

connection starts automatically.

 

 

 

 

 

 

 

 

 

using either one of the following methods.

 

 

 

 

 

 

 

 

 

• “Accessing...” blinks on the screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Auto Update from Network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Manual Update from Network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Manual Update from USB memory device

 

 

 

 

 

 

 

 

 

• The current version of this unit software and the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

latest version of the update file on the network are

 

Auto Update from Network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

displayed when latest version of firmware has been

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

found.

 

 

 

This function allows you to perform the update by

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To update this player software with update file,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

accessing an Internet connection automatically to

 

 

 

 

 

 

 

 

 

 

select “Yes”, and go to step 2.

check if there is a new firmware version every time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the player is turned on.

 

 

 

 

 

 

 

 

 

 

Latest version of firmware has been found.

 

When using this function, it is required to perform

Setup

 

Firmware update is available.

 

 

Proceed with update?

 

 

 

the following settings in advance.

1

Press c/dto select “Settings”, then press bor

 

 

 

 

 

Current Version :

xxxxxxxxxx

 

 

 

 

NOTE

 

 

 

 

 

 

 

 

ENTER.

 

Latest Version :

yyyyyyyyyy

 

 

 

 

 

 

• Make sure that the LAN cable or the wireless LAN

2

Press c/dto select “Software Update

 

If “Yes” will be selected, version update will start.

 

 

 

 

 

 

 

 

 

adapter is connected to this player and make sure that

 

Settings”, then press bor ENTER.

 

 

Yes

 

 

 

 

 

the wireless router/access point is connected to the

3

Press a/bto select “Auto Update Setting”,

 

 

 

 

 

 

 

 

 

 

No

 

 

 

 

 

Internet if using the wireless LAN adapter. (See pages

 

 

 

 

 

 

 

 

then press dor ENTER.

 

 

 

 

 

 

 

 

19–20.)

4

 

 

 

 

 

 

 

 

• If the latest firmware version has been already

• Make sure to perform the communication settings. (See

Press a/bto select “Yes”, then press ENTER.

 

 

 

pages 50–53.)

 

• After this, an Internet connection will be made

 

updated, nothing is displayed on the screen.

• It may take time to access and download the update

 

automatically every time this player is turned on.

2 Press ENTER to start updating.

 

 

 

depending on the Internet connection and other factors.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Downloading latest firmware…

CAUTION

Version : yyyyyyyyyy

 

•Do not remove the LAN cable or the wireless LAN

adapter or unplug the AC cord while downloading or

 

updating software.

30%

3 When the software is successfully updated, a screen is displayed indicating that the update process is completed.

• If the update has failed, an error message appears. Retry the update after checking if the broadband Internetconnection(pages19–20)andcommunication settings (pages 50–53) are performed properly.

4 Press POWER to turn off the player before using again.

Settings

55