Playback Functions

Displaying the Audio Information

You can display the audio information on the disc currently being played back by pressing AUDIO. The displayed contents vary depending on the disc.

BD VIDEO DVD VIDEO

The audio channel currently being played back will be displayed.

If multiple audio channels are recorded, you can switch the audio channel by pressing AUDIO.

DVD-RWDVD-R

When a recorded broadcast with stereo or monaural audio is played back:

“Stereo” is displayed. (Audio cannot be switched.)

NOTE

•When you play a program recorded in stereo or monaural, and if you are listening to the Bitstream sound via the digital output jack, you cannot select the audio channel. Set “Audio Out” to “PCM” (page 46).

•Settings for audio can also be changed in the Function Control screen (Page 41).

•The operation of audio differs according to each disc. You may need to refer to the operation manual of the disc.

•The display for audio information automatically disappears after 5 seconds.

Switching Subtitles

BD VIDEO DVD VIDEO

If subtitles are provided in multiple languages, you can switch between them.

Press SUBTITLE during playback.

•The display indicates the subtitle number currently being played back, and the subtitles appear.

Each time SUBTITLE is pressed, the subtitles change.

•“–” is displayed if a disc has no subtitles.

•You can also select “Off”.

NOTE

•Settings for subtitles can also be changed in the Function Control screen (Page 41).

•The operation of subtitles differs according to each disc. You may need to refer to the operation manual of the disc.

•The display for subtitle information automatically disappears after 5 seconds.

Switching the Angle

BD VIDEO DVD VIDEO

If multiple angles are recorded, you can switch between them.

1Press FUNCTION during playback.

• The Function Control screen is displayed on the TV.

2Press a/bto select the Angle Number column, then press ENTER.

BD-VIDEO

1 /3

5 / 25

00 : 20 : 30

2 English

1

1 DTS Off

3Press a/bto select the desired Angle Number, then press ENTER.

4Press jor FUNCTION to close the Function Control screen.

NOTE

•The displayed items vary depending on the disc.

•If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the BD/DVD video playback. In cases like this, close the Function Control screen.

•The operation of angles differs according to each disc. You may need to refer to the operation manual of the disc.

•The display for angle information automatically disappears after 5 seconds.

Displaying the Angle Mark

BD VIDEO DVD VIDEO

You can change settings so that Angle Mark appears in the right bottom part of the screen when multiple angles are recorded. The settings can be changed in “Settings” – “Playback Setting” – “Angle Mark Display” (Page 48).

40