SETTINGS

Before using the USB device

5 Press ENTER to move to the next screen.

(USB HDD, USB memory device)

6 Press a/bto select “Erase” or “Format”, then

CAUTION:

press ENTER.

Erase: Deletes only BD-VIDEO data written on the

• Do not remove the USB device or unplug the AC

USB device such as BD-LIVE data.

cord while the operations for “USB (HDD/Memory)

Format: Be aware that all data including BD-VIDEO

Management” or “Software Update Settings (Manual

Update from USB memory device)” are being

data and software update data will be deleted.

performed.

 

•Do not use a USB extension cable and/or hub when

 

 

 

connecting a USB device to the player’s USB1 or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB2 terminal.

 

 

 

 

 

 

 

 

 

Erase

 

Erases BD-VIDEO data on USB memory.

 

 

 

−−Using a USB extension cable and/or hub may

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

prevent the player from performing correctly.

 

 

 

 

 

 

 

 

 

Format

 

Erase all contents on USB memory

 

NOTE:

 

 

 

 

 

 

 

 

 

 

 

including protected contents.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• SHARP cannot guarantee that all brands’ USB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

devices will operate with this player.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Only USB memory devices formatted with FAT 32/16

1 Insert the USB device into the player’s USB

• If you want to delete only the unneeded software

 

 

 

are compatible.

 

 

 

 

update data after the software is updated, delete

 

 

 

When formatting a USB memory device using a PC,

terminal.

 

the data on the USB device using a PC.

 

 

 

perform the following settings.

 

 

 

 

 

 

 

 

 

 

 

7 Press a/bto select “Yes”, then press ENTER.

 

 

 

Format File System: FAT32

Example: Front*

 

 

 

Allocation Unit Size: Default Allocation Size

• A confirmation message is displayed. Check that

 

 

 

 

 

 

 

 

 

 

 

 

 

See page 18 regarding USB HDD formats.

 

 

 

 

 

 

 

 

the correct USB device is displayed, and then

 

 

 

 

 

 

 

 

 

 

 

 

 

continue.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 Press a/bto select “USB1” or “USB2”, then

 

USB (HDD/Memory) Management

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The following instructions explain how to delete data

 

 

 

 

 

 

 

• When a wireless LAN adapter is inserted, or only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

one USB device is connected to this player, this

such as the Virtual Package data and the BD-LIVE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selection screen does not appear. In such cases,

data in a USB device and also initialize all data in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

after step 7, proceed to step 9.

USB device.

 

 

 

USB device

 

 

 

 

9 Start the process.

 

 

 

NOTE

 

* A USB terminal is also available on the rear side (USB1

 

 

 

 

• The screen for the current operation will display.

• When you insert or remove a USB device, be sure to

terminal).

 

 

 

 

 

 

 

 

2 Press POWER to turn on the player.

 

 

 

 

 

 

 

 

 

 

 

turn off the main power of this player and the USB

 

 

 

 

 

 

 

 

 

 

 

device (only if connecting a USB HDD) and make sure

3 Press c/dto select “Settings”, then press bor

 

 

 

 

 

Complete

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

that “Quick Start” is set to “No” (See page 47).

ENTER.

 

 

 

 

 

 

 

 

• When you perform the “Erase” operation, data which

4 Press c/dto select “USB (HDD/Memory)

 

 

 

 

 

OK

 

 

 

 

 

has been saved to the player’s internal memory (game

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

score, etc.) will also be deleted.

Management”, then press bor ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The “USB (HDD/Memory) Management” screen is

10 Press ENTER.

 

 

 

 

 

 

 

 

 

 

displayed.

 

 

 

 

 

11 Press HOME or EXIT to exit.

 

 

 

 

 

• “No USB Memory” appears when no USB is

inserted.

54