Sharp LC-60LE740E, LC-70LE740E Channel strength of DVB-T/T2, Channel strength of DVB-C, S2*2

Initial auto installation
Checking signal strength and			E Checking channel strength			5 Position and align the antenna so that the
			4 Press a/bto select “Channel strength”, and			maximum possible values for “Signal strength”
channel strength (DVB-T/T2*1/C/S*2/
						and “Quality” are obtained.
S2*2)			then press ;.			NOTE
			• You can input a specified frequency band using the
If you install a DVB-T/T2/C/S/S2 antenna for the first			0_9 numeric buttons.			• The values of “Signal strength” and “Quality” indicate
			Channel strength of DVB-T/T2			when to check the appropriate alignment of the
time or relocate it, you should adjust the alignment						antenna.
of the antenna to receive a good reception while			Supply voltage	Frequency	MHz	Supplying power to the antenna
checking the antenna setup screen.			Signal strength
I 741 series only			Channel strength	CH No.		You must supply power to the antenna in order
J 740 series only				Signal strength
						to receive digitally/terrestrially broadcast stations
1 Go to “HOME” > “TV Menu” > “Setup” > “View
				Current	Max.	after connecting the antenna cable to the antenna
setting” > “Channel settings” > “Antenna setup-
				Quality		terminal on the rear of the TV.
DIGITAL”.
						1 Go to “HOME” > “TV Menu” > “Setup” > “View
2 Press a/bto select “Digital setup” or “Satellite				Current	Max.
						setting” > “Channel settings” > “Antenna setup-
setup”, and then press ;.
						DIGITAL” > “Supply voltage”.
E Checking signal strength			Channel strength of DVB-C
						2 Press c/dto select “On”, and then press ;.
3 Press a/bto select “Signal strength”, and then			Supply voltage	Frequency	MHz
press ;.			Signal strength
				Symbol rate
Signal strength for DVB-T/T2/C			Channel strength	QAM modulation
Supply voltage				Signal strength
Signal strength				Current	Max.
Channel strength	CH No.
				Quality
	Signal strength
	Current	Max.		Current	Max.
	Quality		Channel strength of DVB-S/S2
	Current	Max.
			Signal strength	Frequency	MHz
Signal strength for DVB-S/S2			Channel strength
				Symbol rate
Signal strength				Band	Vert/Low
				Signal strength
Channel strength
	Signal strength			Current	Max.
				Quality
	Current	Max.		Current	Max.
	Quality

Current Max.

17