Sharp LC-60LE740RU View settings, Digital setting, Auto installation, Programme setup

Basic adjustment

View settings	4 Press a/bto select the broadcast standard	Digital setting
	you want to search, and then press ;.

Go to “HOME” > “TV Menu” > “Setup” > “View setting”.

Menu

CH list	Setup
:Enter	:Back

View setting

Auto installation

Channel settings

Quick start

Individual setting

View setting

Auto installation

The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital, satellite and analogue individually and reconfigure the settings after the initial auto installation has been completed.

1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Auto installation”.

2Press c/dto select “Yes”, and then press ;.

3Press a/b/c/dto select the desired language, and then press ;.

NOTE

•PIN input is required when executing “Auto installation”. The default PIN is “1234”. To change the PIN setting, refer to Individual setting — PIN (Page 38). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 67).

•You cannot set the Home/Store setting and the country setting in “Auto installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.

•The current country setting is displayed on the screen.

EDigital search

After selecting the service you want to search, either “Terrestrial” or “Cable”, refer to Digital

broadcast setting on page 15.

EAnalogue search

The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue

broadcast setting on page 15.

ESatellite search

After selecting “Satellite search”, the current DVB-S/S2 setting screen is displayed. Refer to the “Satellite search” setting on page 16.

Important information:

Satellite services are only available for the 740 model series.

NOTE

•After selecting “Next” in the DVB-S/S2 setting screen, you need to select your preferred satellite broadcast to start searching.

View setting

Programme setup

You can reconfigure the DTV service settings automatically or manually.

1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup”.

2Press a/bto select the broadcast standard you want to reconfigure, and then press ;.

NOTE

•PIN input is required when executing “Programme setup”. The default PIN is “1234”. To change the PIN setting, refer to Individual setting — PIN (Page 38). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 67).

35

Terrestrial

You can reconfigure the following settings when you select “Terrestrial” in the initial auto installation or the “Auto installation” menu.

EAdditional search

Use this menu to add new services automatically after “Digital search” in the “Auto installation” menu has been completed.

EManual search

Add new services within a specified frequency band.

•Enter the frequency using 0_9 numeric buttons.

•You can perform “Manual search” with a service number only when the five Nordic countries have been selected in the country setting.

EManual adjust

Configure various settings for each service using the colour (R/G/Y/B) buttons.

Service	Service	Lock	CH skip	Old LCN
no.	name

Lock CH skip Delete Sort

1Press a/bto select the desired service.

2Press the colour button on the remote control unit corresponding with the item you want to reconfigure.

•The ✔ mark indicates the operation is set to on. Each time the colour button is pressed, you can switch the corresponding operation on/off.