Sharp LC-70LE741S Headphone/Audio out select, Headphone out setting, Colour system, Position

Useful viewing functions

Option

Headphone/Audio out select

You can select which device is used for outputting audio.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/ Audio out select”.

	Item
Headphone	Output audio through headphones.
Audio out	Output audio through an A/V receiver
	or surround audio controller.

CAUTION

•This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing.

NOTE

•If you select “Audio out” when a cable is inserted in the HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are muted.

•When you select “Audio out”, you can adjust the TV sound volume with the i+/- buttons.

Option

Headphone out setting

You can select the headphone/speaker audio output when using the headphones.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone out setting”.

	Item
Headphone	Audio output from headphones only.
Dual	Audio output from headphones and
	speakers.

NOTE

•This function does not work when “Change audio output device” (Page 30) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”.

•Regarding the volume adjustment when “Dual” is set:

−Adjust the speaker volume with the i+/- buttons on the remote control unit.

−Adjust the headphone volume with the i+/- buttons on the TV.

−The headphone volume is not muted even by pressing e (Mute) button on the remote control unit.

•When not using the headphones:

−Audio outputs from the speakers regardless of the settings.

Option

Colour system

You can change the colour system to one that is compatible with the image on the screen.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Colour system”.

NOTE

•The factory preset value is “Auto”.

•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g., “PAL”, “SECAM”).

Screen effect settings

Option

Channel selecting effect

This function shows a screen effect when choosing or changing channels.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”.

Option

Programme title display

This function allows you to display programme information such as the title and airtime by tuning a channel.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Programme title display”.

NOTE

•This function is available only when the DTV/SAT mode is selected.

Adjusting image position

Option

Position

For adjusting a picture’s horizontal and vertical position.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Position”.

Item

H-Pos.	Centres the image by moving it to the
	left or right.
V-Pos.	Centres the image by moving it up or
	down.

NOTE

•Adjustments are stored separately for each input source.

•Depending on the input signal type, “Wide mode” setting or “Video mode” for the USB media mode, a position setting may not be available.

•This function is not available for DTV broadcasts with MHEG signals.

•This function is available for 3D images converted from 2D images or normal 2D images.

42