5 Press the PLAY/PAUSE button to start the MiniDisc unit recording.
6 Begin playback on the stereo system, and the output will be recorded.
To interrupt recording
Press the PLAY/PAUSE button.
zTo resume recording, press the PLAY/PAUSE button again.
zThe track number will be increased by one each time the recording is interrupted.
To stop recording
Press the /:OFF button.
zWhen recording stops, "TOC" appears. While "TOC" appears, the MiniDisc recorded contents have not yet been updated.
zTo prevent the new recording from being lost, it is not possible to remove the MiniDisc while "TOC" is dis- played.
To update the recorded contents of the MiniDisc
Press the /:OFF button while in the stop mode.
The power turns off after recorded contents have been updated on the MiniDisc.
About the TOC
After any recording or editing function, "TOC" (Table Of Contents) is displayed. To finalise the recording or editing function, press the /:OFF button. During this process, "TOC" will flash and "TOC EDIT!" will be displayed. Dur- ing any recording or editing function, the MiniDisc unit lid is locked, and the MiniDisc cannot be removed until the process is finalised.
Warning:
If the power is removed (Battery/AC adaptor) while "TOC" is displayed, the MiniDisc unit lid will remain locked until the battery/main power is restored and the unit is turned on. Your new recordings or edited changes will be lost and your MiniDisc may become unusable.
Caution:
While "TOC" or "TOC EDIT!" is displayed, follow the instructions below.
-Do not jerk or bump the unit.
-Do not unplug the AC adaptor.
-Do not remove the rechargeable battery or an alka- line battery.
-Do not subject the unit to shock.
Otherwise, tracks may not be recorded properly.
Notes:
zChanging the volume level while recording does not affect the recording.
zYou cannot adjust the bass level while recording.
Basic Operation -Recording-
13