„ About charging time | Sharp MD-MT90 guide

„About charging time

After about 3.5 hours have passed, "" will go out. The battery charging is about 90% com- plete.

To charge the battery fully, continue charging for about 2 more hours. In this case, you do not need to press the MODE/CHRG button. Even if the MODE/CHRG button is pressed, "" will not appear.

Notes:

zCharge the battery within the range of 41°F - 95°F (5°C - 35°C).

zCharging is completed when "" does not blink when you plug in the AC adaptor and press the MODE/CHRG button.

zThe unit can be left in the charging state after it is completed.

Caution:

zUse the specified battery AD-N70BT only. Do not charge a battery (nickel-cadmium, alkaline, etc.) other than that specified.

zDo not remove the outer cover of the re- chargeable battery. It may cause heat gen-

eration, fire, or explosion.

zDo not dip the battery in water, do not dis-

pose of it in a fire, and do not take it apart.

zIf the rechargeable battery terminal is dirty, charging may not start. In such a case, wipe off the dirt with a dry cloth.

zDo not disassemble the battery.

„Using with the rechargeable or alkaline battery

1 Disconnect the AC adaptor.

2 Insert the rechargeable bat- tery or alkaline battery from the (+) marked side.

Use a commercially available LR6, "AA" size alkaline battery.

Notes:

zSetting the volume level to "0" while recording with the rechargeable or an alkaline battery reduces the bat- tery drain.

zWhen you do not use the unit for hours, remove the battery. (The battery drains gradually even when the power is turned off.)

zCarry the battery in the supplied case.

zThis unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit.

Caution:

Do not use a nickel-cadmium battery.

Useful Features -Battery Power-

29

00/12/26 90SEC_16_30.fm

Image 29

Sharp MD-MT90 operation manual „ About charging time, „ Using with the rechargeable or alkaline battery

Contents

Thank you for purchasing this Sharp product MD-MT90 AD-N70BT x AccessoriesOptional accessories Contents Special Notes Special Notes Important Introduction „ Main unit Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators „ Display panel „ Remote control unit Precautions PrecautionsAvoid using or leaving the unit in the following places „ Important Inserting a MiniDisc Inserting a MiniDisc Connections Connections Preparation Basic Operation -Recording RecordingAnalog recording Digital recording About the TOC To update the recorded contents of the MiniDiscTo stop recording Basic Operation -Playback Playback To turn off the power „ Volume control„ Bass control To interrupt playback Advanced Playback Useful Features -Advanced Playback„ To locate the desired portion „ To locate the beginning of a track „ Random play or repeat play „ To play at double speedTo interrupt fast playback To return to normal playback Advanced Recording Useful Features -Advanced Recording„ Playback sound-actuated recording Press the ENTER/SYNC button Start recording „ Long-play recordingPress the MODE/CHRG button while the recording is paused „ To start recording from the middle of a Track Advanced Recording „ To create your own track numbers „ Helpful tip when attaching a label„ Recording tracks as a single track Press the Edit button Recording „ About track numbers„ About sampling rate converter Useful -Advanced To write recorded contents on the MiniDisc Useful Features -Recording from a MicrophoneRecording from a Microphone „ To record from a microphone „ Sound-actuated recording Mic Syn- chronized recording Recording from a Microphone During a mic manual recording „ Track intervalsDuring a mic synchro recording Creating track numbers manually Checking Displays Features Remaining amount of battery level is shown by Useful Features -Checking DisplaysBattery indicator during operation While in the stop mode, press the or Useful Features -Battery Power Battery Power„ Charging the rechargeable battery Insert the rechargeable battery „ About charging time „ Using with the rechargeable or alkaline battery Hold Function To cancel the hold mode Changing Default Settings Changing Default Settings „ Creating disc and track names Titling a MiniDiscTitling a MiniDisc „ To enter a space „ Characters symbols„ To erase a character „ Stamping titles from another MiniDisc „ To add characters Master MiniDisc operation Insert a master MiniDisc Editing a Recorded MiniDisc Editing a Recorded MiniDisc„ To erase tracks one at a time „ To erase all of the tracks at once „ To combine tracks „ To divide a track „ To move a track „ Listening through a stereo system Listening through Another System„ Listening through a car stereo Another System References -Other Features and Caution Other Features and Caution„ Resuming auto play „ Rechargeable battery MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages Play MD Troubleshooting Troubleshooting „ Cleaning MaintenanceMaintenance „ If trouble occurs „ General SpecificationsSpecifications „ MiniDisc Recorder Sharp Electronics Corporation