Titling a MiniDisc (continued)

Advanced Features

-Titling a MiniDisc-

To add characters

1Put the unit in the character input mode.

(Perform steps 1 - 2 on page 32.)

2Press the VOL+ or VOL--- button to move

the cursor to the right of the character, where you want to add a new character.

3Select the character to add.

(Perform steps 3 - 4 on page 32.)

4Press the ENTER/SYNC button.

5Press the EDIT button.

6"TOC" will be displayed. To write the up- dated contents to the MiniDisc, press the /:OFF button.

You cannot remove the MiniDisc while "TOC" is dis- played. "TOC" will not disappear until the recorded contents have been updated.

Stamping titles from another MiniDisc

Before stamping

When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the master MiniDisc to another MiniDisc (for stamping).

1. What is a master MiniDisc?

A recordable MiniDisc that contains tracks and charac- ter information. (You cannot transfer the information from a playback-only MiniDisc.)

2. What is a MiniDisc for stamping?

A MiniDisc that contains the same tracks in the same or- der as the master MiniDisc. (Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same.)

34

00/12/26 90SEC_31_39.fm

Page 34
Image 34
Sharp MD-MT90 operation manual „ To add characters, „ Stamping titles from another MiniDisc