Advanced Recording (continued)

About track numbers

1.Track numbers are created automatically during re- cording via the analog connection when a silence of 1 second or more is detected (Auto marker function). A series of tracks can be recorded as one by disa- bling the auto marker function, see page 21.

zWhen recording, if a programmed playback is per- formed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source.

zTrack numbers may not be created properly, depend- ing on the connected stereo system.

Recording-

Features

About sampling rate converter

This portable MD incorporates a sampling rate converter, which means it can record from digital radios or DAT tape recorders.

Useful -Advanced

22

2.When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function).

Playback

First track

Second track

Third track

side

Track A

Track B

Track C

 

First track

Second track

Third track

Recording

side

Track A

Track B

Track C

zTrack numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise.

zThe track numbers on the playback side may not match the track numbers recorded on the MiniDisc.

Note for digital recording

You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analog inputs is not affected.

00/12/26 90SEC_16_30.fm

Page 22
Image 22
Sharp MD-MT90 operation manual „ About track numbers, Recording, „ About sampling rate converter, Useful -Advanced