Play MD | Sharp MD-MT90 specs

NO SIGNAL	z Poor connection of the digital cable.	z Connect the digital cable securely.
	z No output signal comes out from the	z If the portable CD player has a function to prevent sound
	connected unit to playback.	skips, deactivate it.
	z The input signal has improper sampling	z Play back with the connected unit.
	frequency.

NOT PLAY	z You tried to play back a track that can-	z Play back another track.
	not be played with this equipment.

PLAY MD	z You recorded on a playback-only disc.	z Replace it with a recordable disc.

POWER ?	z Improper power is being supplied.	z Use one of the specified power sources.

PROTECTED	z The write protection tab of a MiniDisc is	z Move the write protection tab back to its original posi-
	set to the protected position.	tion.
	z You tried to record on a playback-only disc.	z Replace it with a recordable MiniDisc.

SORRY	z Since a track number is currently being	z Wait for a while and try the operation again.
	located or updated, the unit cannot ac-
	cept your command.

TEMP OVER	z The temperature is too high.	z Turn off the power, and wait for a while.

TOC FORM (**)	z There is an error in the recording signal.	z Erase all of the tracks, and then record again.

TOC FULL	z There is no space left for recording	z Replace it with another recordable disc.
	character information (track names,
	disc names, etc.).

Tr. Protect	z The track has been protected from be-	z Edit the track with the device on which it was recorded.
	ing erased.

? DISC	z A disc which contains data other than	z A disc which contains non-music data cannot be played.
	music was played.
	z There is an error in the signal recorded	z Replace it with another recorded disc.
	on the disc.

Number or symbol appears in (*) position.

00/12/26 90SEC_40_47.fm

References	-Error Messages-

43

Image 43

Sharp MD-MT90 operation manual Play MD

Contents

Thank you for purchasing this Sharp product MD-MT90 Optional accessories AccessoriesAD-N70BT x Contents Special Notes Special Notes Important Introduction Important Introduction -Names of Controls and Indicators Names of Controls and Indicators„ Main unit „ Display panel „ Remote control unit „ Important PrecautionsPrecautions Avoid using or leaving the unit in the following places Inserting a MiniDisc Inserting a MiniDisc Connections Connections Preparation Digital recording RecordingBasic Operation -Recording Analog recording To stop recording To update the recorded contents of the MiniDiscAbout the TOC Basic Operation -Playback Playback To interrupt playback „ Volume controlTo turn off the power „ Bass control „ To locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback „ To locate the desired portion To return to normal playback „ To play at double speed„ Random play or repeat play To interrupt fast playback Press the ENTER/SYNC button Useful Features -Advanced RecordingAdvanced Recording „ Playback sound-actuated recording Press the MODE/CHRG button while the recording is paused „ Long-play recordingStart recording „ To start recording from the middle of a Track Advanced Recording Press the Edit button „ Helpful tip when attaching a label„ To create your own track numbers „ Recording tracks as a single track Useful -Advanced „ About track numbersRecording „ About sampling rate converter „ To record from a microphone Useful Features -Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a Microphone „ Sound-actuated recording Mic Syn- chronized recording Recording from a Microphone Creating track numbers manually „ Track intervalsDuring a mic manual recording During a mic synchro recording Checking Displays Features While in the stop mode, press the or Useful Features -Checking DisplaysRemaining amount of battery level is shown by Battery indicator during operation Insert the rechargeable battery Battery PowerUseful Features -Battery Power „ Charging the rechargeable battery „ About charging time „ Using with the rechargeable or alkaline battery Hold Function To cancel the hold mode Changing Default Settings Changing Default Settings Titling a MiniDisc Titling a MiniDisc„ Creating disc and track names „ To erase a character „ Characters symbols„ To enter a space „ Stamping titles from another MiniDisc „ To add characters Master MiniDisc operation Insert a master MiniDisc „ To erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc „ To erase tracks one at a time „ To combine tracks „ To divide a track „ To move a track Another System Listening through Another System„ Listening through a stereo system „ Listening through a car stereo „ Resuming auto play „ Rechargeable battery Other Features and CautionReferences -Other Features and Caution MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages Play MD Troubleshooting Troubleshooting „ If trouble occurs Maintenance„ Cleaning Maintenance Specifications Specifications„ General „ MiniDisc Recorder Sharp Electronics Corporation